Brand: BRESSER
Category: Microscope
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 9652200
Uploaded: April 20, 2026, 7:47 p.m.
Warranty Information
Refer to the information on "Warranty" and "Service" for warranty claims and service inquiries.
11. Assembling the microscope: Attach the microscope to the clamp in the center of the stand.
12. Power supply: Connect the USB-A connector of the USB cable to a free USB port on the PC. The microscope will be powered after the PC is switched on. The LED ring light will illuminate.
13. Adjusting the lighting: Connect the digital microscope to the PC. The brightness of the illumination can be adjusted by repeatedly pressing the dimmer button.
14. Connecting to a PC: Download and install the HiView software. Mount the digital camera as described. Connect the USB-A connector of the USB cable to a free USB port on the PC. The LED illumination will light up upon successful connection. The digital microscope is ready for use. Images can be viewed and saved using the HiView software.
15. Adjust stand: Loosen the locking screw on the side and adjust the microscope to the desired position, then retighten the screw.
16. Adjusting the zoom: The zoom range is 50x to 1000x. The zoom range can be changed in the software by setting the display ratio.
17. Focusing the object: Adjust the microscope to the desired position. Set the desired magnification in the software. Turn the zoom wheel until the image on the monitor appears sharp.
18. Recording: Select your digital microscope and establish a connection. Take photos or videos. Adjust resolution and select save folder. Tools are available for annotation and measurement.