Brand: bryant
Category: Thermostat
Document Type:
Language: EN
Manual for T6-NHP01-A, T6-NAC01-A & T6-NRH01-B - Troubleshooting and error codes + PDF Download
Uploaded: April 7, 2025, 8:13 p.m.
Manual Publish Date: 2014-08-01
Warranty Summary
No warranty information is mentioned in this manual.
Setting Temperature:
- Open the thermostat door.
- Use the up/down buttons to adjust the heating or cooling temperature based on the current mode (heat or cool).
- Press the 'mode' button to switch between heating and cooling settings.
- Close the door to save settings.
Touch 'N' Go Presets (Home, Away, Sleep):
- Press 'home', 'away', or 'sleep' buttons to quickly apply preset temperature settings for different scenarios.
- To customize these presets, press and hold the desired button and adjust the temperature using up/down buttons, then press and hold the button again to save.
Fan Control:
- Press the 'fan' button to toggle between 'auto fan' (fan runs only during heating/cooling cycles) and 'fan on' (continuous fan operation).
Troubleshooting and error codes
| Problem | Description |
|---|---|
| E1 | System isn't communicating properly. Call your heating and cooling dealer for service. |
| -- | Room air temperature sensor has failed. Call your heating and cooling dealer for service. OR Outdoor temperature sensor isn't working. Call your heating and cooling dealer for service. |
| E4 | There's an internal memory failure. Call your heating and cooling dealer for service. |
| E5 | The humidity sensor isn't working. Call your heating and cooling dealer for service. |