Brand: BSH
Category: Oven
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for NGM5055UC, NGMP055UC, NGM5655UC, NGM8055UC, NGM8065UC, NGM8655UC, NGM8665UC, NGMP655UC
Uploaded: Nov. 21, 2025, 7:25 p.m.
Warranty Information
Refer to the Statement of Limited Warranty in the Use and Care Manual for warranty information.
Installation Summary
1. Preparation: Gather tools and parts. Ensure electrical and gas requirements are met. Prepare the countertop by cutting it to the specified dimensions and applying heat-reflective tape if needed. Seal the cooktop with foam tape.
2. Installation: Insert the cooktop into the cutout. Attach hold-down brackets. Connect the gas supply line to the regulator, ensuring all connections are leak-free. Connect the electrical supply to a grounded outlet.
3. Burner Assembly: Place burner caps correctly on their bases. Install burner grates, ensuring they seat properly.
4. Final Check: Verify igniter operation and flame characteristics. Flames should be blue with no yellow tips (except for LP gas). Ensure all grates are properly positioned.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Ignitors do not spark or "on" indicator lights do not glow | No power to appliance | Check power source for blown fuse or tripped circuit breaker. |
| Burner flames are too high | Improper regulator adjustment | Have a qualified technician adjust the regulator. |
| Flames shoot out of burners | Incorrect burner cap placement | Ensure burner caps are correctly placed on burner bases. |
| Burners do not ignite | Incorrect burner cap placement | Ensure burner caps are correctly placed on burner bases. |
| Burner flames light unevenly | Incorrect burner cap placement | Ensure burner caps are correctly placed on burner bases. |
| Burner emits gas odor | Incorrect burner cap placement or gas leak | Ensure burner caps are correctly placed. Check for gas leaks using a soap solution. If leak persists, contact a qualified technician. |
| Yellow Flames | Further adjustment is required. | Adjust regulator or contact a qualified technician. |
| Yellow Tips on Outer Cones | LP Gas | This is normal for LP gas. |
| Soft Blue Flames | Natural Gas | This is normal for Natural Gas. |