Brand: CANON
Category: Camera
Document Type: Manual
Language: EN
Manual for XA50 / XA55
Uploaded: Aug. 10, 2025, 12:26 a.m.
Manual Publish Date: 2019-03-01
Warranty Information
This is a limited one-year warranty covering defective parts and labor for products purchased in the USA and Canada.
Powering the Camcorder: Use the supplied compact power adapter or a battery pack. Connect the adapter to the DC IN terminal or attach the battery pack to the camcorder.
Charging the Battery: Connect the power adapter to the camcorder and plug it into a power outlet. The POWER/CHG indicator will light up red while charging.
Attaching Accessories: Attach the handle unit, lens hood, and microphone holder unit as needed. Ensure all screws are tightened securely.
Using the LCD and Viewfinder: Open the LCD panel to adjust the viewing angle. The viewfinder can also be adjusted for comfortable viewing and diopter settings.
Recording: Select the operating mode and video format (MP4 or XF-AVC). Adjust focus, exposure, white balance, and other settings as required for your shoot.
Troubleshooting and error codes
| Issue | Possible Cause | Solution |
|---|---|---|
| Camcorder does not turn on | Battery pack is not attached or is depleted. | Attach a charged battery pack or connect the compact power adapter. |
| No image on the screen | LCD panel is closed or viewfinder is in use. | Open the LCD panel or pull out the viewfinder. |
| Cannot record video | SD card is not inserted, is full, or is write-protected. | Insert a compatible SD card, format it, or replace it. Ensure the write-protect tab is not engaged. |
| Poor image quality | Lens is dirty or has fingerprints. | Clean the lens with a soft, lint-free cloth. Use the lens hood to reduce flare. |
| Audio is distorted or too quiet | Microphone settings are incorrect or input level is too high/low. | Adjust microphone sensitivity, input levels, and use the attenuator if necessary. Check audio input settings. |
| Error message displayed | Various issues, refer to manual. | Refer to the "Troubleshooting" section (page 123) in the manual for specific error codes and solutions. |