Manual for XH G1/XH A1

Manual for XH G1/XH A1

Brand: Canon

Category: Camera

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:06 p.m.

Manual Publish Date: 2006

Warranty Information

One-year limited warranty for parts and labor in the U.S.A., with exceptions for Video Heads (3 months).

Introduction to Operation

This manual guides you through the operation of your Canon XH G1/XH A1 camcorder. It covers:

  • Important safety instructions and warnings.
  • Preparing the camcorder, including power supply and accessories.
  • Recording functions such as selecting signal standards, adjusting focus, exposure, and audio.
  • Customization options for buttons and displays.
  • Playback functions for tapes and memory cards.
  • Editing and connecting to computers.
  • Troubleshooting common problems.
  • Specifications and optional accessories.

Familiarize yourself with the contents before operating the camcorder for optimal use and safety.

Troubleshooting and error codes

Problem Cause Solution
Camcorder will not turn on. Battery pack is not correctly attached. Attach the battery pack correctly.
The camcorder switches off by itself. Power save function has been activated. Turn on the camcorder.
The screen switches on and off. Battery pack is exhausted. Replace or charge the battery pack.
Buttons will not work. Cassette is not loaded. Load a cassette.
" flashes on the screen. Condensation is detected. See reference page.
"REMOVE THE CASSETTE" appears on the screen. Camcorder stopped operating to protect the tape. Remove the cassette and reinsert it.
The wireless controller will not work. Camcorder and wireless controller are not set to the same remote sensor mode. Change the remote sensor modes.
Abnormal characters appear on the screen. The camcorder does not operate properly. This camcorder uses a microcomputer. External noise or static electricity may cause abnormal characters to appear on the screen. Disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings.
The POWER dial is not in the OFF position but the POWER indicator is off. The LED indicators option in the customized functions is set to [02 OFF]. Set the [LED] setting to one of the other types.
Image will not appear on the screen. The STANDBY lever is at the LOCK position. Turn the STANDBY lever to the STANDBY position.
"SET THE TIME ZONE, DATE AND TIME" appears on the screen. Time zone, date and time are not set, or the built-in rechargeable lithium battery is exhausted. Set the time zone, date and time. If necessary, power the camcorder with the compact power adapter and leave it connected with the POWER dial set to OFF for at least 24 hours to recharge the built-in battery before making the settings.
Pressing the start/stop button will not start recording. Cassette is not loaded. Load a cassette.
Camcorder will not focus. Autofocus does not work on that subject. Focus manually.
The tally lamp will not light up. The tally lamp option in the customized functions is set to [02 OFF]. Set the [TALLY LAMP] setting to [ON] or [BLINK].
A vertical light bar appears on the screen. Bright light in a dark scene may cause a vertical light bar (smear) to appear. This is not a malfunction. Record in the Av mode with F5.6–F8.0.
Viewfinder picture is blurred. Viewfinder is not adjusted. Adjust the viewfinder with the dioptric adjustment lever.
Audio is not recorded. The input channel selection switch is not set to the correct position. Set the input channel selection switch to the correct position.
Audio is recorded in a very low level. The AUDIO LEVEL switch is set to M, and recording level is set too low. Adjust the audio level correctly.
Privacy Policy