Brand: CANON
Category: Camera
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for XH G1/XH A1
Uploaded: Aug. 10, 2025, 12:28 a.m.
Manual Publish Date: 2006-01-01
Warranty Information
The limited warranty covers defective materials or workmanship for one year, with exceptions for video heads and commercial use.
Preparation: Charge the battery pack and attach it to the camcorder. Adjust the dioptric adjustment lever and viewfinder settings for clear viewing. Attach the lens hood. Insert batteries into the wireless controller.
Operation: Learn to use the various buttons and dials for recording, playback, and customization. Access menus to adjust settings like time zone, date, time, image quality, and audio levels. The manual details recording modes, focus, exposure, white balance, and image stabilization.
Troubleshooting: Provides a checklist for common problems related to power, recording, playback, and memory card operations, offering potential causes and solutions.
Accessories: Lists and describes optional accessories like battery packs, car battery adapter, filter sets, system case, tripod adapter, and shooting brace. Also details available provided accessories.
Specifications: Provides technical details about the system, video and audio recording, image sensor, lens, memory card, and power requirements.
Troubleshooting and error codes
| Problem | Cause | Solution |
|---|---|---|
| Camcorder will not turn on. | Battery pack is not correctly attached. | Attach the battery pack correctly. |
| The camcorder switches off by itself. | Power save function has been activated. | Turn on the camcorder. |
| The screen switches on and off. | Battery pack is exhausted. | Replace or charge the battery pack. |
| Buttons will not work. | Cassette is not loaded. | Load a cassette. |
| " flashes on the screen. | Condensation is detected. | See reference page. |
| "REMOVE THE CASSETTE" appears on the screen. | Camcorder stopped operating to protect the tape. | Remove the cassette and reinsert it. |
| The wireless controller will not work. | Camcorder and wireless controller are not set to the same remote sensor mode. | Change the remote sensor modes. |
| Abnormal characters appear on the screen. The camcorder does not operate properly. | This camcorder uses a microcomputer. External noise or static electricity may cause abnormal characters to appear on the screen. | Disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. |
| The POWER dial is not in the OFF position but the POWER indicator is off. | The LED indicators option in the customized functions is set to [02 OFF]. | Set the [LED] setting to one of the other types. |
| Image will not appear on the screen. | The STANDBY lever is at the LOCK position. | Turn the STANDBY lever to the STANDBY position. |
| "SET THE TIME ZONE, DATE AND TIME" appears on the screen. | The POWER dial is not set to a recording program. | Set the POWER dial to a recording program. |
| Pressing the start/stop button will not start recording. | Time zone, date and time are not set, or the built-in rechargeable lithium battery is exhausted. | Set the time zone, date and time. If necessary, power the camcorder with the compact power adapter and leave it connected with the POWER dial set to OFF for at least 24 hours to recharge the built-in battery before making the settings. |
| Camcorder will not focus. | Cassette is not loaded. | Load a cassette. |
| The tally lamp will not light up. | The POWER dial is not set to a recording program. | Set the POWER dial to a recording program. |