Manual for imageRUNNER ADVANCE C5500 Series

Machine Operation Summary

The machine operates via two power switches: the main power switch and the control energy saver key. Turning on the main power switch activates the machine, excluding low power or sleep modes. Do not turn off the main power while the HDD is being accessed, indicated by a progress bar, to prevent potential faults (E602).

Power supply considerations include avoiding extension cords due to fire and shock risks. If an extension cord is necessary, ensure it matches the local rated voltage and is securely connected. The socket-outlet should be accessible and near the equipment.

Toner is non-toxic, but should not be thrown into flames to avoid explosions. When handling adhered toner, use dry tissue paper and wash with water. Avoid using warm water, as it can permanently gelate toner particles. Toner particles can react with vinyl polymers.

Lithium battery replacement carries an explosion risk if incorrect types are used; dispose of used batteries according to instructions. Follow specific steps to turn off the power source and disconnect the power plug before servicing. Leaving the power plug connected in dusty, moist, or oily environments can cause fires due to insulation failure. Regularly disconnect the power plug and clean dust and dirt.

When cleaning with organic solvents like alcohol, ensure the solvent completely vaporizes before reassembling. For assembly/disassembly, disconnect the power plug, follow disassembly order in reverse for reassembly, use the correct screw types, and do not operate with parts removed unless specified. Never remove paint-locked screws.