Brand: Canon
Category: Projector
Document Type: Manual
Language: EN
Available Languages: ES , EN
Manual for LV-WX300/LV-X300/LV-S300
Uploaded: Sept. 12, 2025, 4:14 a.m.
Warranty Information
Refer to the warranty card for details on warranty information.
- Starting up: Plug in, remove lens cap, press POWER. Adjust focus if needed.
- Using Menus: Press MENU to access OSD. Navigate with arrow keys and OK/IMAGE.
- Switching Input: Press INPUT to cycle through sources or select manually.
- Adjusting Image: Use focus/zoom rings, AUTO PC for automatic adjustment, or keystone correction for angled projection.
- Shutting down: Press POWER twice. Allow cooling fan to run. Disconnect power if not in use.
Troubleshooting and error codes
| Problem | Cause | Remedy |
|---|---|---|
| Projector does not turn on | No power from cable. | Plug power cord in, ensure outlet is switched on. Wait for cooling process to complete. |
| No picture | Video source not connected/on. | Turn on source, check cables, select correct input. Open lens cover. |
| Blurred image | Lens not focused. | Adjust focus ring. Align projector/screen. Adjust Phase in IMAGE menu. |
| Remote control does not work | Battery dead. Obstruction. Too far. | Replace battery. Remove obstruction. Stand within 8 meters. |
| Password incorrect | Forgot password. | Reset password function. |
| LAN function cannot be used | LAN settings/cable issue. | Verify LAN settings/cables. Reload web page, check IP address. |