Manual for SX60

Manual for SX60

Brand: CANON

Category: Projector

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Sept. 12, 2025, 4:26 a.m.

Warranty Information

Warranty information is not explicitly stated in the provided pages.

Quick Reference – How to start projection

Computer

  1. Install the projector.
  2. Connect the projector and the computer with a cable.
  3. Turn on the projector.
  4. Press the AUTO SET button.
  5. Set up the computer.
  6. Select the input signal by pressing the INPUT button.
  7. Press the AUTO SET button again.
  8. Press the AUTO PC button.
  9. Select the image mode with the IMAGE button.
  10. Start the presentation.

AV Equipment

  1. Install the projector.
  2. Connect the projector.
  3. Turn on the projector.
  4. Press the AUTO SET button.
  5. Set up the AV equipment.
  6. Select the input signal by pressing the INPUT button.
  7. Press the AUTO SET button again.
  8. Select the image mode with the IMAGE button.

Troubleshooting and error codes

Warning Symptom Solution
Lamp Flash Patterns The projector does not turn on.
  1. Check the power cord connection.
  2. Check if the AC power outlet is functional.
  3. Check if the lamp is burnt out (see "Lamp Handling Precautions" on page 13).
The projector turns on, but no image is projected.
  1. Check if the lens cap is removed.
  2. Check the input signal selection.
  3. Check the cable connection.
  4. Perform the Auto Setup function (see page 44).
The image is dim.
  1. Clean the lens.
  2. Check the lamp mode.
  3. Replace the lamp if it is nearing the end of its life (see page 114).
The image is distorted or has color irregularities.
  1. Perform the Auto Setup function (see page 44).
  2. Adjust the color settings (see pages 100-105).
Privacy Policy