Manual for DR-G2140

Manual for DR-G2140

Brand: CANON

Category: Scanner

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Sept. 12, 2025, 4:13 a.m.

Manual Publish Date: 2018

Warranty Information

Warranty information is limited to the product purchase price.

  1. Setup Guide: Follow the steps to check your model and accessories, then install the necessary software.
  2. Connecting to Computer and Power: Connect the scanner to your computer via USB or LAN and plug in the power cord.
  3. Turning Power ON: Ensure the scanner and computer are connected, then press the power switch. Wait for software installation confirmation.
  4. Turning Power OFF: Press and hold the power switch. Wait 10 seconds before turning it back on. Disconnect the power cord for extended periods.
  5. Introduction: Familiarize yourself with the scanner's functions by reading the Setup Guide and User Manual.

Troubleshooting and error codes

Common Problems and Solutions
Scanner does not operate.
  • Check that the power switch is ON and the power cord is connected.
  • Check that the USB or LAN cable is connected securely.
  • Restart the computer.
  • If the scanner is not recognized after installation, uninstall the software and reinstall it.
Scanner does not operate properly.
  • Check the scanner settings in the software.
  • Clean the scanner and sensors.
Paper jam occurs.
  • Check the document loading direction and guides.
  • Remove any foreign objects from the scanner path.
  • Replace the feed rollers and separation pads if worn.
Error message appears.
  • Refer to the "Error Message" section in the manual.
Privacy Policy