Manual for DR-M160II

Manual for DR-M160II

Brand: CANON

Category: Scanner

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Sept. 12, 2025, 4:19 a.m.

Manual Publish Date: 2014-01-01

Warranty Information

Warranty information is limited to the purchase price of the product covered by the warranty.

Setup Guide:

  • Checking the Accessories: Ensure all included items are present.
  • Installing the Software: Install drivers and applications from the Setup Disc.
  • Connecting to a Computer: Connect the scanner to your computer and power supply after software installation.
  • Turning the Power ON: Press the power button to turn on the scanner and computer.

Basic Operation:

  • Document Handling: Learn how to place various types of documents.
  • Scanning Methods: Utilize CaptureOnTouch or CapturePerfect for scanning.

Maintenance:

  • Daily Maintenance: Keep the scanner clean for optimal performance.

Troubleshooting:

  • Common Problems and Solutions: Address issues like slow scanning or unreadable files.
  • Clearing a Paper Jam: Follow steps to remove jammed documents.

Troubleshooting and error codes

Problem 11 Memory becomes insufficient and scanning stops.
If you configure scanning conditions that use a large amount of the computer's memory, scanning may stop because of insufficient memory. Although this depends on the computer's memory size, the possibility of insufficient memory increases if any of the following scanning conditions overlap.
  • [Color Mode] is set to [24-bit Color]
  • A large page size (e.g. Legal) is specified as the [Page Size]. Alternatively, the page size is set to [Scanner's Maximum].
  • A high resolution (600dpi etc.) is specified for [Dots per inch].
If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions (e.g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through/Remove Background] if they are set to on.
Privacy Policy