Manual for R10

Manual for R10

Brand: Canon

Category: Scanner

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:06 p.m.

Warranty Information

This document contains FCC regulations and information regarding the ENERGY STAR Office Equipment Program.

How to Scan
  1. Connect the scanner and computer: Use the provided USB cable to connect the scanner to your computer.
  2. Open the feed tray to turn on the scanner: Press the release lever and raise the feed tray. The start button will light up blue, indicating the scanner is on.
  3. Open the built-in software: Double-click the [CaptureOnTouch Lite Launcher] icon. A pop-up screen will appear.
  4. Raise the document guide.
  5. Load the document: Turn the document upside down with the back side facing you and load it into the feed tray. Align the document guides with the edges of the document.
  6. Select document type and storage location: Choose scan settings and a save location within the software.
  7. Click the [SCAN] button: Initiate the scanning process.
  8. Confirm and Finish: Review the scanned image and click [Finish].

Troubleshooting and error codes

Issue Troubleshooting Steps
CaptureOnTouch Lite does not start
  • Disconnect and reconnect the USB cable.
  • If using a USB hub, connect the scanner directly to the computer.
  • Check security software settings to ensure USB device access is allowed.
  • In Windows, if AutoPlay is off, open Explorer and run the [CaptureOnTouch Lite] icon in [Devices and drives].
Privacy Policy