Brand: CASIO
Category: Digital Camera
Document Type:
Language: EN
Manual for EX-ZR62
Uploaded: Aug. 9, 2025, 11:38 p.m.
Accessories: Check for all included accessories: Rechargeable lithium ion battery (NP-160), USB-AC adapter, Micro USB cable, Strap, Japanese Quick Start Guide, and 13-language Basic Reference.
Getting Started: Charge the battery before use. Load the battery by opening the cover, sliding the battery in until it clicks, and closing the cover. Connect the USB-AC adapter or computer to charge the battery.
Basic Operation: - Turn the camera on/off using the [ON/OFF] button. - Tilt the monitor screen up to 180 degrees for self-portraits or low/high-angle shots. - Use the shutter button to take snapshots. - Explore various features like Wireless Connection, Motion Shutter, Selfie Art, and Time Lapse Movie.
Troubleshooting and error codes
| Problem | Possible Cause and Recommended Action |
|---|---|
| A recorded image was not saved. |
1) Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows  , charge the battery as soon as possible (page 24).2) You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete. |
| Though available lighting is bright, the faces of people in the image are dark. |
Not enough light is reaching the subjects. Change the flash mode setting to  (Flash On) for daylight synchro flash (page 49), or adjust Exposure to the + side (page 48).
|
| Night shots come out bad. |
Use the following BEST SHOT scenes (page 80) when shooting at night. • HS Night Scene (for shooting night scenery only) • HS Night Scene and Portrait (for shooting people against night scenery) |
| Subjects are too dark when shooting images in a seashore or ski area. |
Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode setting to (Flash On) for daylight synchro flash (page 49), or adjust Exposure to the + side (page 48).
|
| Digital zoom will not go up to the maximum value. |
1) The digital zoom setting may be turned off. Turn on digital zoom (page 112). 2) Zoom will not go up to the maximum value if the “Zoom (SR)” setting is "Single". Change the setting to "Off" (page 55). 3) Zoom will not go up to the maximum value if the snapshot size setting is something other than “3M”. Change to a different setting (page 107). |
| The image is out of focus during movie recording. |
1) Focusing may not be possible because the subject is outside the focus range. Shoot within the allowable range. 2) The lens may be dirty. Clean the lens (page 192). 3) During High Speed Movie recording, focus is fixed at the position where it was when recording started. To focus an image, half-press the shutter button for Auto Focus or focus manually before you press [●] (Movie) to start recording. |
| Movie recording suddenly stops. | The camera's protection function may have activated because camera temperature is too high. Wait until the camera temperature drops to normal levels. |
| I can't change the settings of menu items. Menu items for some settings are not displayed on the menu. | Some menu items may not be available, depending on the recording mode in use. While Premium Auto Pro is in use, only the menu items whose settings can be configured will be displayed on the menus. |