Manual for EX-ZR700/EX-ZR710/EX-ZR750

Manual for EX-ZR700/EX-ZR710/EX-ZR750

Brand: CASIO

Category: Digital Camera

Document Type:

Language: EN

Uploaded: Aug. 9, 2025, 11:41 p.m.

  • Quick Start Basics: Learn about the camera's main functions like ART SHOT for artistic effects, High Speed Night Shot for low-light photography, Triple Shot for capturing fast-moving subjects, and Focus Control for creative depth-of-field effects.
  • Premium Auto Pro: Select this mode for automatic scene and subject recognition, delivering higher image quality than standard Auto.
  • Wide Shot: Capture super-wide angle images by combining multiple shots.
  • High Speed Movie: Record at up to 1000 frames per second for slow-motion playback of fast action.
  • FHD Movie Recording: Record high-quality movies in Full High Definition (1920x1080 pixels at 30 fps).
  • First, charge the battery prior to use: Learn how to load and charge the NP-130 battery using the USB-AC adapter or a USB connection to a computer.
  • Configuring Basic Settings: Set up essential functions like display language, date, and time upon first use.

Troubleshooting and error codes

Problem Possible Cause and Recommended Action
Playback The color of the playback image is different from what appears on the monitor screen when shooting. Sunlight or light from another source may be shining directly into the lens when you are shooting. Position the camera so sunlight does not shine directly into the lens.
Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
Images cannot be edited (with White Balance, Brightness, Resize, Trimming, Rotation). Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
• CS group snapshots
• Movies
• Panorama Image
• Snapshots recorded with another camera
File Deletion A file cannot be deleted. 1)The file may be protected. Unprotect the file (page 125).
2)"Delete Key” setting may be “Disabled”. Change the setting to "Enabled" (page 158).
Other The wrong date and time are displayed, or the wrong date and time are being stored along with image data. The date and time setting is off. Set the correct date and time (page 160).
The messages on the display are in the wrong language. The wrong display language is selected. Change the display language setting (page 161).
Images cannot be transferred over a USB connection. 1)The USB cable may not be connected securely. Check all connections.
2)The wrong USB communication protocol is selected. Select the correct USB communication protocol in accordance with the type of device you are connecting (pages 140, 143).
3)If the camera is not turned on, turn it on.
4) Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer's USB port.
Language selection screen appears when the camera is turned on. 1)You did not configure initial settings after purchasing the camera or the camera may have been left with a dead battery. Configure the correct settings (pages 21, 161).
2)There may be a problem with the camera's memory data. If this is the case, perform the reset operation to initialize the camera's setup (page 162). After that, configure each setting.
If the language selection screen does not re-appear when you turn the camera on, it means that the camera's memory management data has been restored.
If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center.
There are various indicators and values on the monitor screen. The monitor screen shows indicators and other information about shooting conditions and the image you are recording. You can use [▲] (DISP) to select what information you want to include on the display (page 10).
The time and date settings configured the first time after purchasing the camera are reset to their factory defaults when I remove the camera's battery. Load the camera's battery and reconfigure the time and date settings (page 21). Do not remove the battery from the camera for at least 24 hours after configuring time and date settings. After that, the settings will not be reset if you remove the battery.
• If the time and date are reset to their factory default settings when you remove the battery after it has been loaded for more than 24 hours, it could mean that the camera's setting memory is defective. Contact your retailer or a CASIO authorized service center.
Buttons are not responsive right after the power has been turned on. With large capacity memory cards there is a delay after the power has been turned on before the buttons become responsive.
Privacy Policy