Brand: Cisco
Category: Storage
Document Type: Manual
Language: EN
Manual for NSS300 Series Smart Storage
Uploaded: Sept. 12, 2025, 4:24 a.m.
Warranty Information
Warranty information is not explicitly stated in this section of the manual.
This manual provides comprehensive instructions for setting up and managing the Cisco NSS300 Series Smart Storage devices. It covers initial setup, including hardware installation and configuration via the Setup Wizard or LCD panel. Detailed guidance is provided on managing system status, administration settings (network, hardware, security), disk and RAID management, and various network services and applications. The manual also includes troubleshooting steps for RAID operations and instructions for using the LCD display for system configuration and monitoring. Appendices offer specifications and resources for further assistance.
Troubleshooting and error codes
| System Message | Description |
|---|---|
| Sys. Fan Failed | System fan failed. |
| Sys. Overheat | System is overheated. |
| HDD Overheat | Disk overheated. |
| CPU Overheat | CPU is overheated. |
| Network Lost | Both LAN 1 and LAN 2 are disconnected in Failover or Load-Balancing mode. |
| LAN1 Lost | LAN 1 is disconnected. |
| LAN2 Lost | LAN 2 is disconnected. |
| HDD Failure | Disk has failed. |
| HDD Ejected | Disk is ejected. |
| Vol1 Full | Volume is full. |
| Vol1 Degraded | Volume is in degraded mode. |
| Vol1 Unmounted | Volume is unmounted. |
| Vol1 Nonactivate | Volume is not activated. |