Brand: CRAFTSMAN
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 125.17608
Uploaded: Nov. 21, 2025, 7:48 p.m.
Warranty Information
This product is warranted against defects in material or workmanship for one year from the purchase date.
Operation Summary
Dry Vacuuming: Ensure the cartridge filter is installed. Connect the hose, select an accessory, plug in the vacuum, and turn it on using the 'I' switch. Turn off using the 'O' switch and unplug when finished.
Wet Vacuuming: Remove the cartridge filter and install the foam sleeve filter. Connect the hose, ensure the switch is OFF, then plug in and turn on using the 'I' switch. When the tank is full, the motor speed will increase; turn off the machine, drain the liquid, and refit the drain cap. Remember to remove the foam filter and re-install the cartridge filter for dry vacuuming.
Blowing Feature: Ensure the collection tank is empty. Remove the hose from the vacuum port and insert it into the blowing port. Attach the desired accessory. Plug in the vacuum with the switch OFF, then turn on using the 'I' switch while holding the hose. Turn off using the 'O' switch and unplug when done.
Troubleshooting and error codes
| Problem | Possible Causes | Corrective Action |
|---|---|---|
| Vacuum will not operate |
1) No power supply. 2) Faulty power cord. 3) Collection tank is full. 4) Switch in the wrong position |
1) Check power supply - cord, breakers, fuses. 2) Unplug and check the power cord. If damaged, have it repaired by a professional. 3) Empty collection tank. 4) Press the ON 'I' button on the power head. |
| Dust comes out from motor cover. | 1) The cartridge filter is missing or damaged. | 1) Attach or replace the cartridge filter. |
| Reduced efficiency and motor/speed vibration. | 1) There is a blockage in the nozzle, hose, or the tank inlet. The dust filter is clogged by fine dust. | 1) Check nozzle, hose and tank inlets for blockage. Take off the filter and clean it. Or install new cartridge filter. |