Brand: CRAFTSMAN
Category: Workbench
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Drawer accessory
Uploaded: Sept. 12, 2025, 4:27 a.m.
Warranty Information
Read and follow all safety rules and operating instructions before first use.
Assembly: Follow step-by-step instructions to assemble the drawer accessory. This includes ensuring leveling screws are extended, attaching frame pieces, installing drawer slides on both the workbench and drawers, and inserting the drawers. Ensure all fasteners are tightened. Adjust bench to desired height.
Operation:
Operation:
- Removing Drawers: Empty drawer, extend fully, then release the lever or tabs on the slides and pull out.
- Installing Drawers: Align slides carefully and push the drawer in until it stops.
- Leveling Foot Adjustment: Adjust leveling feet using a screwdriver or wrench to achieve the desired position.
- Lubricate slides twice yearly.
- Clean surfaces with mild detergent and water.
- Apply auto wax to preserve finish and protect against scratches.
- Use nonflammable cleaning fluid for grease and oil removal.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers are stiff or difficult to open/close. | Slides are not lubricated. | Lubricate slides with grease or equivalent. |
| Obstruction in slides. | Check for any foreign objects or debris in the slides and remove. | |
| Unit is not square or level. | Square the unit and adjust leveling feet. | |
| Drawer falls out or does not engage properly. | Drawer not fully inserted. | Ensure drawer is pushed in until it stops. |
| Release mechanism not engaged correctly during installation. | Remove and reinstall drawer, ensuring release mechanism engages properly. | |
| Unit is unstable or wobbles. | Unit is on an un-level surface. | Move to a level surface and adjust leveling feet. |
| Fasteners are loose. | Tighten all fasteners. |