Brand: CREATE
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Warm Crystal
Uploaded: April 20, 2026, 7:41 p.m.
Warranty Information
The warranty period is 24 months from the date of purchase.
Basic Operation
Power On/Off: Press the power button to turn the heater on or off. It will enter standby mode.
Heating Modes: Press the MODE button to cycle through ECO, Comfort, and Antifreeze modes. The "Heating" icon will light up when active.
Temperature Adjustment: Use the Left/Right buttons to adjust the temperature between 5°C and 50°C. The displayed temperature is ambient; set temperature is shown when keys are pressed.
Timer: Press the Timer button to set a timer from 1 to 24 hours. The timer icon will appear on the screen.
Child Lock: Press and hold the right button to lock the control panel (padlock icon). Press and hold the left button to unlock.
Wi-Fi/Light: Short press to adjust screen brightness (full, half, off). Long press to configure Wi-Fi.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Heater does not turn on | Check if the plug is connected properly. Press and hold the power button for three seconds. |
| Wi-Fi connection fails | Ensure the Wi-Fi icon is flashing. If not, long press the WIFI/Light button for three seconds. Verify your home Wi-Fi password. Try secondary connection mode if needed. |
| Screen is not lighting up | Press the WIFI/Light button to adjust brightness. |
| Child lock is activated | Press and hold the left button to unlock. |