Manual for THERA RETRO

Manual for THERA RETRO

Brand: CREATE

Category: Kitchen Appliances

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 8:13 p.m.

Warranty Information

No warranty information is available in the provided pages.

Making Espresso Coffee

  1. Remove and lock the filter holder.
  2. Add ground coffee and tamp.
  3. Insert filter holder and lock.
  4. Press the coffee button to brew.
  5. Press ON/OFF to turn off.

Preparing a Cappuccino

  1. Prepare espresso.
  2. Heat milk with the steam wand.
  3. Pour frothed milk into espresso.

Frothing Milk / Adding Steam

  1. Prepare appliance for steaming.
  2. Heat milk with steam wand.

Troubleshooting and error codes

PROBLEM CAUSE SOLUTION
The tank is leaking or water is seeping out from the tank The tank is not positioned properly. Allow the centre of the tank to align with the opening of the main body.
The volume of water in the tank exceeds the indicated MAX line. The water volume in the tank should be within the MIN and MAX line indicators.
Water is leaking from the bottom of the coffee maker. There is too much water in the drip tray. Please empty the drip tray.
Water is leaking from the outer side of the filter. There is a malfunction with the coffee maker Please contact the authorized service facility for repairing.
There is coffee powder residue on the filter edge. Clean any excess coffee or residue.
Acidic (vinegary) after-taste in the Espresso coffee. You haven't decalcified the machine properly. Decalcify the coffee machine following the instructions in this manual.
If ground coffee is stored in a hot, damp place for a long period of time, the coffee will turn bad. Please use fresh coffee grinds, or store coffee in a cool, dry place. After opening a package of coffee grinds, store it in an air tight container to maintain its freshness.
The coffee maker does not work. The power outlet is not connected correctly. Plug the power cord into a wall outlet correctly. If the appliance still does not work, please contact the authorized service facility for repairing.
The steamer does not froth. The steam ready indicator is not lighting up. Only after the steam ready indicator is illuminated, can the steamer be used to froth.
The frothing jug is too big or the shape is not compatible Use a high cylindrical pitcher.
The steam indicator has a yellow light. Overheating. It is necessary to release a little hot water with the knob. When the light goes out, it can be used again to boil the coffee.
Privacy Policy