Manual for DCS-6100LH

Setting up the Camera

1. Download the mydlink app and scan the QR code. Ensure your device is connected to the network.
2. Launch the app, create or sign in to your account. Allow location and notification access.
3. Tap the Menu button, then select 'Add a Device'.
4. Follow onscreen instructions to complete setup.

Mounting the Camera

1. Stick the alignment sticker where you want to place the camera.
2. Drill two 25mm deep holes using an 8mm drill bit.
3. Hammer in plastic wall anchors.
4. Twist screws into anchors, leaving the top exposed.
5. Align mounting holes on the camera with screws and slide down to lock.

Using the mydlink App

Remotely access your camera via the mydlink app. Tap to watch live view, then tap again for controls.

• Audio: Tap to disable/enable audio.
• Snapshot: Tap to take a video snapshot.
• Recording: Tap to start/stop video recording.

Device Settings

Tap Menu > Device Settings > Select your camera to configure options like Name, Privacy Mode, Motion Settings, Storage, Microphone, Night Vision, Wi-Fi, Time Zone, and Firmware updates.