Brand: D-Link
Category: Networking
Document Type: Quick Start Guide
Language: EN
Available Languages: EN , ES
Quick Start Guide for DCS-8010LH
Uploaded: Nov. 21, 2025, 6:36 p.m.
Manual Publish Date: 2018-03-08
Warranty Information
The warranty period is 24 months.
Setting Up Your Camera with mydlink
- Download the mydlink app: Search for "mydlink" in the iTunes App Store or Google Play and download it to your mobile device.
- Launch the app and create/sign in: Open the mydlink app. Create a new account or sign in to your existing one.
- Scan QR code: When prompted, use the QR code from the Quick Install Card or the label on your device.
Your camera is now ready to use. Visit mydlink.com for firmware updates.
Mounting the Camera
- Detach camera from base: Hold the base, place thumb on the tab, press release buttons, and pull the camera off.
- Mark holes: Position the base, use a pencil to mark holes, and ensure the cable channel faces the desired direction.
- Drill holes: Drill two 25mm deep holes using a 6mm drill bit. Insert anchors if the wall is concrete.
- Route power cable: Pull the power cable through the middle of the base and cable channel.
- Attach base: Align the base with the drilled holes and secure it with the provided screws.
- Attach camera: Attach the camera to the base, pull the power cable to remove slack, and adjust the angle.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| WHY IS THE CAMERA VIEW HAZY OR BRIGHT WHEN USING NIGHT VISION MODE? | The IR night vision lights on the camera may be reflecting off of a nearby surface or window. Try repositioning your camera to avoid reflections or glare. |
| WHAT CAN I DO IF I FORGET MY CAMERA PASSWORD? | If you forget your camera password, you will need to perform a hard reset of your camera. This process will change all your settings back to the factory defaults. To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 10 seconds while your camera is plugged in. |