Parts/Service for LXE10E136GE

Parts/Service for LXE10E136GE

Brand: DAIKIN

Category: Refrigeration Unit

Document Type: Parts/Service

Language: EN

Available Languages: EN , ES

Uploaded: Sept. 12, 2025, 4:30 a.m.

Warranty Information

Warranty information is not explicitly stated in this document.

Preparation for starting

  1. Set "MAIN" position of unit select switch in both two units (Main and Stand-by units).
  2. Turn "OFF:MAIN" of start switch (SSW) and turn "OFF" of alarm switch (ALS) in both units.
  3. Connect a power plug to the electrical power source, and turn "ON" the switch of power source.

Starting

  1. Turn "ON:MAIN" of start switch (SSW) in the unit a power plug connected.
  2. Set temperature controllers.
  3. Make sure to be no unusual noise and vibration.
  4. Turn "ON" the alarm switch (ALS) after the inside temperature of container reaches below the set value (+15°C) of the thermostat for alarm buzzer.

Note) The thermostat has been adjusted to activate alarm buzzer and lamp at +15degC. Do not change the thermostat setting.

Privacy Policy