Manual for 1210S

Manual for 1210S

Brand: Dell

Category: Projector

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Sept. 12, 2025, 4:13 a.m.

Manual Publish Date: 2009-08-01

Warranty Information

Warranty information is not explicitly stated in this document.

Turning Your Projector On:

  1. Remove the lens cap.
  2. Connect the power cord and signal cables.
  3. Press the Power button.
  4. Turn on your source (computer, DVD player, etc.).
  5. Connect your source to the projector using the appropriate cable.
  6. By default, the input source is VGA-A. Change if necessary.
  7. If multiple sources are connected, press the Source button to select the desired source.

Turning Your Projector Off:

  1. Press the Power button.
  2. Press the Power button again.
  3. To power off quickly, press and hold the Power button for 1 second.
  4. Disconnect the power cord.

Adjusting Projected Image:

  • Height: Use the front tilt adjustment wheel and tilt adjustment wheels.
  • Zoom and Focus: Rotate the zoom tab and focus ring.

Troubleshooting and error codes

Guiding Signals Meaning
LED Steady On Power On
LED Blinking Standby Mode
Power LED Blinking Amber Projector is powering up.
Power LED Steady Amber Projector is warming up.
Power LED Blinking Blue Projector is powering up.
Power LED Steady Blue Projector is ON.
Lamp LED Steady Amber Lamp is approaching end of life or lamp failure.
Lamp LED Blinking Amber Lamp module not properly installed or lamp driver failure.
Temp LED Steady Amber Internal temperature too high or color wheel failure.
Temp LED Blinking Amber Projector is cooling down.
Privacy Policy