Brand: Dell
Category: Projector
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for P519HL
Uploaded: Sept. 12, 2025, 4:21 a.m.
Manual Publish Date: 2018-07-01
Warranty Information
No warranty information is available in the provided document.
About Your Dell Projector
Your projector comes with the following items:
- Power cable
- VGA cable
- Remote control
- 1.2 m USB cable
- User's Guide and Documentation
Projector Top and Bottom View
Identify key components:
- Top View: IR receivers, Power button, Zoom tab, Focus tab, Lens
- Bottom View: Tilt adjustment wheel, Mounting holes for wall and ceiling mount
Projector Connections
Various ports are available:
- USB Type A
- RJ45 connector
- USB Type A Power (+5V/1.8A)
- HDMI-1 (1.4) connector
- HDMI-2 (1.4) connector
- VGA input
- Audio input connector
- Audio output connector
- RS232 connector
- Mini USB (mini type B) connector
- Power cord connector
Remote Control
Buttons include:
- Power, Back, Up, Down, Left, Right
- Volume up/down
- Menu, Enter
- Video in, Video mode
- Freeze, Blank, Mute
Troubleshooting and error codes
| Problem (continued) | Possible Solution (continued) |
| Partial, scrolling, or incorrectly displayed image | If using a Dell laptop, set resolution to WXGA (1280 x 800). Right-click desktop > Properties > Settings tab. Verify 1280 x 800 for external monitor. Press Fn+F8. If issues persist, restart equipment. For non-Dell laptops, consult documentation and upgrade video drivers. |
| The screen does not display your presentation | If using a portable computer, press Fn+F8. |
| Image color is incorrect | Set signal type to RGB in OSD Image Settings of Advanced Settings tab if graphics card sends wrong signal. Use Test Pattern in Projector Settings of Advanced Settings menu to check colors. |
| Image is out of focus | 1. Adjust focus until clear using Focus Adjust in Projector Settings of Advanced Settings menu. 2. Ensure projection screen is within required distance (2.55 ft (0.78 m) ~ 3.67 ft (1.12 m)). |
| The image is stretched when displaying a 16:9 DVD | Projector auto-detects signal format and maintains aspect ratio. If still stretched, adjust aspect ratio in Display Settings of Advanced Settings menu. |
| Image is reversed | Select Projector Settings of Advanced Settings from OSD and adjust projector mode. |
| TEMP light is solid amber | Projector has overheated. Auto-shuts down. Turn on again after cooling. Contact Dell if problem persists. |
| TEMP light is blinking amber | Projector fan failed. Auto-shuts down. Try clearing projector mode by holding Power button for 10 seconds. Wait 5 minutes, try powering on again. Contact Dell if problem persists. |
| The remote control is not operating smoothly or works only within a limited range | Battery level might be low. Replace with new CR2032 battery. |
| LAN control support |
|