Brand: Dell
Category: Projector
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 9:10 p.m.
Manual Publish Date: 2016-06-01
None
Your projector comes with all the items shown below. Ensure that you have all the items, and contact Dell if anything is missing.
Package Contents
The S560P projector projects the connected computer's desktop image onto the whiteboard and it acts as input device to the computer. You can navigate, select, and interact with your computer programs from the whiteboard. The S560P is a pen-based interactive projector. Download and install Dell S560x Interactive Utility for first-time setup and interactivity calibration.
NOTE: Your computer must have the following minimum system requirements:
| Projector Status | Description | Control Buttons | Indicator | |
|---|---|---|---|---|
| Power | TEMP (Amber) | LAMP (Amber) | ||
| Standby mode | Projector in Standby mode. Ready to power on. | White Flashing | OFF | OFF |
| Warming up mode | Projector takes some time to warm up and power on. | White | OFF | OFF |
| Lamp on | Projector in Normal mode, ready to display an image. | White | OFF | OFF |
| Cooling mode | Projector is cooling to shutdown. | |||
| Projector overheated | Air vents might be blocked or ambient temperature may be above 40°C. The projector automatically shuts down. Ensure that the air vents are not blocked and that the ambient temperature is within operational range. If the problem persists, contact Dell. | OFF | AMBER | OFF |
| Fan breakdown | One of the fans has failed. The projector automatically shuts down. If the problem persists, contact Dell. | OFF | AMBER Flashing | OFF |
| Lamp driver breakdown | The lamp driver has failed. The projector automatically shuts down. Unplug the power cord. After three minutes plug the power cord and turn the display on again. If this problem persists, contact Dell. | AMBER Flashing | OFF | AMBER Flashing |
| Color Wheel breakdown | Color wheel cannot start. The projector has failed and the projector automatically shuts down. Unplug the power cord. After three minutes plug the power cord and turn the display on again. If this problem persists, contact Dell. | White | AMBER Flashing | AMBER Flashing |
| Lamp failure | Lamp is defective. Replace the lamp. | OFF | OFF | AMBER |
| Fault - DC supply (+12V) | Power supply has been interrupted. The projector automatically shuts down. Unplug the power cord. After three minutes plug the power cord and turn the display on again. If this problem persists, contact Dell. | AMBER Flashing | AMBER | AMBER |
| Lamp module connection failed | Lamp module connection may be disrupted. Check the lamp module and ensure that it is properly installed. If the problem persists, contact Dell. | OFF | OFF | AMBER Flashing |