Brand: DEWALT
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DXV06P
Uploaded: Nov. 21, 2025, 7:30 p.m.
Warranty Information
This is a 3-year limited warranty covering defects in materials or workmanship, excluding misuse and accidents.
Unpacking & Setup: Pull lid latches, remove power head and accessories. Attach accessories as instructed. Ensure correct filter is installed before replacing power head. Secure power head by snapping latches. Insert hose into tank, attach extension wands and cleaning accessories. Plug into outlet to use.
Dry Pick-Up: Ensure the filter is correctly positioned and covers the cage completely. For fine dust, empty tank and clean/replace filter more frequently. A dry filter is necessary; a wet filter will clog easily.
Wet Pick-Up: Remove dry filter. A clean cartridge filter can be used for small amounts of liquid. For large quantities, remove the filter. A foam filter is recommended for liquids with debris. After wet pick-up, drain excess liquid from the hose into the tank before shutting off.
Blowing Operation: Locate blowing port, insert hose, and turn vacuum on. Always wear safety goggles.
Troubleshooting and error codes
| PROBLEM | SOLUTION |
|---|---|
| Motor does not run | Check power cord, plugs and outlet. Ensure the on/off switch is in the ON position (1). |
| Suction capacity decreases | Remove blockages in the suction nozzle, suction tube, suction hose or filters. Replace the paper or fleece dust bag. Check for proper installation of the filters. |
| Vacuum stops running | Thermal overload has been tripped: 1. Turn the vacuum off and disconnect vacuum cleaner from power source. 2. Empty the canister, if needed. 3. Allow the unit to cool. 4. Plug the power cord into an appropriate outlet and turn on/off switch to the ON position (1) to test. If vacuum will not restart call 1-888-899-0146. |
| Dust comes out while vacuuming | Check for proper installation of the filters. Ensure filters are not damaged; replace if necessary. Ensure filter seals are in place and are secure. |