Brand: DEWALT
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DXV06PL
Uploaded: Sept. 12, 2025, 4:27 a.m.
Warranty Information
3-year limited warranty covering defects in materials or workmanship.
Unpacking & Set-Up: Pull lid latches, remove power head and accessories. Attach casters. Ensure correct filter is installed before replacing power head. Secure power head by snapping latches. Insert hose end into tank. Attach extension wands and cleaning accessories. Plug in and turn ON. Always turn OFF and unplug before installing or cleaning accessories.
Dry Pick-Up: Ensure filter is correctly positioned to prevent leaks. For very fine dust, empty tank frequently. A dry filter is essential for dry pick-up.
Wet Pick-Up: Remove dry use filter. A clean cartridge filter can be used for small liquid amounts. For larger quantities, remove cartridge filter. Consider a foam filter for liquids with debris.
Blowing Operation: Locate blowing port, insert hose, turn ON. Always wear safety goggles.
Troubleshooting and error codes
| PROBLEM | SOLUTION |
| Motor does not run | Check power cord, plugs and outlet. Ensure the on/off switch is in the ON position(1) |
| Suction capacity decreases | Remove blockages in the suction nozzle, suction tube, suction hose or filters. Replace the paper or fleece dust bag. Clean or replace the filters. |
| Vacuum stops running | Empty the dust tank, refer to Empty the tank under Operating instructions. Thermal overload has been tripped: 1. Turn the vacuum off and disconnect vacuum cleaner from power source. 2. Empty the canister, if needed. 3. Allow the unit to cool. (around 3-5 minutes). 4. Plug the power cord into an appropriate outlet and turn on/off switch to the ON position(1)to test. If vacuum will not restart call 1-888-899-0146 |
| Dust comes out while vacuuming | Check for proper installation of the filters. Ensure filters are not damaged; replace if necessary. Ensure filter seals are in place and are secure. |