Manual for DXV09P

Name: Manual for DXV09P
Brand: DEWALT
Availability: InStock

Brand: DEWALT

Category: Vacuum Cleaner

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:01 p.m.

Warranty Information

3-year limited warranty covering defects in materials or workmanship. Does not cover misuse, abuse, or acts of God.

Unpacking & Set-Up: Remove power head and accessories from the tank. Attach casters, ensure proper filters are installed, and secure the power head. Insert hose, attach extension wands and cleaning accessories. Plug into an outlet to begin.Caster Assembly: Invert tank, align casters with sinking places, and secure with screws. Return tank upright.Accessory Bag Holder Assembly: Attach brackets to tank with screws. Place the accessory bag holder into the bracket.Operation: The unit is ready for dry vacuuming or blowing. Turn ON by pushing the switch. The vac can also be used for wet pickup. It has a float mechanism that automatically cuts off airflow when the liquid reaches a predetermined level.Blowing Operation: Locate the blowing port, insert the hose, and turn the unit ON.Cleaning: Clean the exterior with a damp cloth. Wash the tank with warm water and mild soap, then wipe dry.Storage: Empty and clean the dust tank. Wrap and hang the cord. Store accessories in the holder. Store the vac indoors.

Troubleshooting and error codes

PROBLEM	SOLUTION
Motor does not run	Check power cord, plugs and outlet. Ensure the on/off switch is in the ON position (I)
Suction capacity decreases	Remove blockages in the suction nozzle, suction tube, suction hose or filters. Replace the paper or fleece bag. Check for proper installation of the filters. Clean or replace the filters. Empty canister, refer to Empty the tank under Operating.
Vacuum stops running	Thermal overload has been tripped: 1. Turn the vacuum off and disconnect vacuum cleaner from power source. 2. Empty the canister, if needed. 3. Allow the unit to cool. 4. Plug the power cord into an appropriate outlet and turn on/off switch to the ON position (1) to test. If vacuum will not restart call 1-888-899-0146.
Dust comes out while vacuuming	Check for proper installation of the filters. Ensure filters are not damaged; replace if necessary. Ensure filter seals are in place and are secure.