Brand: DEWALT
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DXV14P
Uploaded: Sept. 12, 2025, 4:18 a.m.
Warranty Information
3-year limited warranty covering defects in materials or workmanship.
Unpacking & Set-Up Summary
- Pull lid latches outward, remove power head and accessories.
- Attach heavy-duty casters.
- Ensure proper filters are installed for cleaning operation.
- Replace power head, secure latches firmly.
- Insert air hose into tank inlet.
- Attach extension wands to hose.
- Attach cleaning accessories to wands.
- Plug into outlet.
Caster Assembly
- Invert dust tank, align casters/wheel assembly with bottom, secure with screws.
- Return dust tank upright.
Troubleshooting and error codes
| PROBLEM | SOLUTION |
|---|---|
| Motor does not run | Check power cord, plugs and outlet. Ensure the on/off switch is in the ON position (I). |
| Suction capacity decreases | Remove blockages in the suction nozzle, suction tube, suction hose or filters. Replace the paper or fleece bag. Check for proper installation of the filters. Clean or replace the filters. |
| Vacuum stops running | Empty canister, refer to Empty the tank under Operating. Thermal overload has been tripped: 1. Turn vacuum off and disconnect power. 2. Empty canister. 3. Allow unit to cool. 4. Plug in and turn on to test. If it does not restart, call 1-888-899-0146. |
| Dust comes out while vacuuming | Check for proper installation of the filters. Ensure filters are not damaged; replace if necessary. Ensure filter seals are in place and are secure. |