Brand: DEWALT
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DXV38S
Uploaded: Sept. 12, 2025, 4:26 a.m.
Warranty Information
This product comes with a 3-year limited warranty.
Unpacking & Set-Up:
- Pull lid latches, remove power head and accessories.
- Attach casters.
- Ensure proper filters are installed.
- Replace power head and secure latches.
- Insert air hose into tank inlet.
- Attach extension wands to accessory end of hose.
- Attach cleaning accessories.
- Plug cord into wall outlet.
Operating Instructions:
- Plug power cord into outlet.
- Turn on/off switch to ON.
- Use DEWALT connection system for tools.
Wet Pick Up:
- Ensure canister is empty and filters are removed.
- Switch off immediately if foam or liquid escapes.
Emptying Canister:
- Turn off and unplug.
- Remove power head.
- Empty canister contents.
Blowing Feature:
- Locate blowing port.
- Insert hose into port.
- Turn vacuum ON.
Storage:
- Empty and clean canister.
- Clean vacuum inside and out.
- Clean or replace filters.
- Store hose and cord as shown.
Troubleshooting and error codes
| PROBLEM | SOLUTION |
|---|---|
| Motor does not run | Check power cord, plugs and outlet. Ensure the on/off switch is in the ON position (1) |
| Suction capacity decreases | Remove blockages in the suction nozzle, suction tube, suction hose or filters. Replace the paper or fleece bag. Check for proper installation of the filters. Clean or replace the filters. |
| Vacuum stops running | Thermal overload has been tripped: 1. Turn the vacuum off and disconnect vacuum cleaner from power source. 2. Empty the canister, if needed. 3. Allow the unit to cool. 4. Plug the power cord into an appropriate outlet and turn on/off switch to the ON position (1) to test. |
| Dust comes out while vacuuming | Check for proper installation of the filters. Ensure filters are not damaged; replace if necessary. Ensure filter seals are in place and are secure. |