Brand: e-ride INDUSTRIES
Category: Vehicle
Document Type: Manual
Language: EN
Manual for EXV2, EXV4
Uploaded: April 20, 2026, 7:53 p.m.
Warranty Information
12 Month Limited Warranty covering defects in materials and workmanship for the e-ride vehicle.
Vehicle Operation
To operate your e-ride vehicle, ensure the key is in the "ON" position. Use the accelerator pedal to control speed and the brake pedal to slow down or stop. The direction selector switch (forward/reverse) controls the vehicle's movement direction. Familiarize yourself with the dash display for battery life and vehicle status. Always ensure the parking brake is engaged when stopped to prevent unintended movement.
Troubleshooting and error codes
| Fault code | Issue | Action to Take |
|---|---|---|
| BDI Cutout | Batteries are below 20% state of charge, vehicle will drive at half speed | Recharge vehicle |
| Over Temp | Speed controller is above normal operating temperature | Stop vehicle and allow speed controller to cool |
| Accel Fault | Accelerator pedal pressed during power up | Make sure accelerator pedal is not pressed, then cycle key switch |
| Seq Fault | Direction selector switch was in "forward" or "reverse" and park brake was released when key was turned on. | Set park brake, then cycle key switch |
| Coil S/C | Main contactor issue | Cycle key switch, if fault still persist contact e-ride industries |
| Fail | There is an internal issue with the speed controller | Contact e-ride industries |