Brand: ELECTROLUX
Category: Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PERFECT DB 1
Uploaded: Nov. 21, 2025, 9:26 p.m.
Warranty Information
Refer to the warranty information provided with the appliance for details.
Basic Operation
Getting Started: Read instructions, check voltage, plug into a proper socket.
Temperature Setting: Use garment care labels and the ironing table for fabric-specific temperatures. Sort laundry by temperature needs.
Dry Ironing: Set steam selector to 'O' (off). Set temperature to desired level.
Steam Ironing: Fill water reservoir. Set steam selector to desired position. Set temperature selector to fabric type. Wait for power indicator to go out. Hold iron horizontally for steam.
Spray Function: Press button for water spray. Use for dry or steam ironing.
Super Steam Jet: Set to MAX temperature. Lift iron slightly and press jet button for extra steam. Wait 5 seconds between presses.
Steaming Hanging Items: Set to MAX temperature. Hold iron 10-20 cm from fabric and use super steam jet.
Storage: Unplug, set temperature and steam to cold/off. Empty water. Store upright. Wrap cord.
Cleaning: Clean monthly. Unplug, set steam to off, fill with water, set temp to MAX, plug in. Wait for light off. Set steam selector to position C. Hold horizontally over sink and press steam selector for 1 min. Water will flush out.
Troubleshooting and error codes
| What to do if... | Possible Cause | Solution |
|---|---|---|
| No "steam" appears when using on a steam setting? | Warm, dry air (winter) | Reduced vapour is normal, absorbed by dry air. |
| Fluff in steam chambers | Empty and refill water reservoir; tip appliance forwards to drain. | |
| Drops of water are coming out of the steam exit holes? | Steam selector not set correctly or temperature too low. | Do not set steam selector to another position than "O" until steam ironing temperature is reached. Increase temperature if too low. |
| Stains appear on the washing while ironing? | Dry ironing fluff | Clean steam iron. Rub warm soleplate with water and vinegar or non-abrasive cleaner. Clean inside of water reservoir. |
| Improper soleplate temperature. | Clean the steam iron. Use water and vinegar or non-abrasive cleaner on warm soleplate. | |
| Soleplate is rough or furred? | Iron temperature set too high. | Select correct ironing temperature for fabric (see ironing table). |