Brand: ELECTROLUX
Category: Dryer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for FEQ1442ES0
Uploaded: Sept. 12, 2025, 4:13 a.m.
Manual Publish Date: 2012-04-01
Warranty Information
Refer to your Owner's Guide for important safety and warranty information.
Operating Your Dryer
- Prepare items for drying.
- Check that the lint screen is clean and in place.
- Load the dryer, optionally adding a fabric softener sheet, and close the door.
- Select the desired cycle and drying temperature by turning the TEMP knob.
- A suitable dryness level and options will be displayed. To change the dryness level, press DRYNESS until the desired selection flashes. To select an option, press OPTIONS until the desired option flashes, then press SELECT. Follow the same steps to delete an option.
- Press START to begin the cycle.
- To pause or change settings, press PAUSE/CANCEL once. To resume, press START. To stop or change the cycle, press PAUSE/CANCEL twice.
- A signal will sound at the end of the cycle. Remove items immediately and hang or fold.
- Clean the lint screen after every load.
Troubleshooting and error codes
| Error Code | Error | Possible Causes | Solutions |
|---|---|---|---|
| 4 beeps | Dryer ran too long | Lint filter blocked. Ventilation system clogged. Dryer overloaded. | Remove lint; wash lint filter to remove softener sheet residue. Clean out ventilation system. Reduce load size. |
| 6 beeps | Push button does not function | Push button held too long or wedged in the control panel. | Press buttons lightly and release. Disengage button. |