Manual for T4300S

Manual for T4300S

Brand: Electrolux

Category: Dryer

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Sept. 12, 2025, 4:29 a.m.

Coin-operated laundries:

  1. Fill garments into the drum and close the door.
  2. Select temperature (High, Medium, Low, No heat).
  3. Pay with coins/card.
  4. Press start.
  5. Wait for the dryer to stop or press stop.
  6. To prevent wrinkling, empty the dryer as soon as the program has ended. An anti-wrinkle program engages if the dryer is not emptied immediately.

OPL - Dryer with manual operation:

  1. Clean filter.
  2. Fill garments into the drum and close the door.
  3. Select programme or set drying time.
  4. Select temperature.
  5. Press start.
  6. Wait for the dryer to stop or press stop.
  7. To prevent creasing, empty the dryer as soon as the program has ended.

AHL - Dryer with manual operation:

  1. Clean filter.
  2. Fill garments into the drum and close the door.
  3. Select programme or set drying time.
  4. Select temperature.
  5. Press start.
  6. Wait for the dryer to stop or press stop.
  7. To prevent creasing, empty the dryer as soon as the program has ended.

Troubleshooting and error codes

Error codes

The tumble dryer has automatic error indication. Error indication is displayed as a flashing code. Please refer to the manual Selecta Control from ver. 4.xx for an explanation of error codes. A service technician must be contacted should an error be displayed. The user can, however, try to correct some error codes himself.

Error codeCause and Solution
E05 or E06 Motor too hot. Stop the dryer, wait 5 minutes, then restart and choose a program. If the error reappears, contact a service technician.
E12 Dryer overfilled with wet clothes. Remove some clothes, close the door, press start. If the error reappears, contact a service technician.
E14 Gas error. Dryer must be in operation on a program with heat. Reset up to three times. If more resets are needed, contact a service technician.
E15 Dryer overfilled. Remove some clothes, close the door, press start. If the error reappears, contact a service technician.
E16 Start button pressed while air pressure switch is activated. Reset by opening/closing the door and pressing start button.
Privacy Policy