Brand: Electrolux
Category: Oven
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Combi TOUCH
Uploaded: Sept. 12, 2025, 4:19 a.m.
Manual Publish Date: 2023-08
Warranty Information
Warranty is provided according to local regulations and covers defects in materials and workmanship.
Starting the Oven:
Press the 'I' side of the ON/OFF button to switch the oven on. Press 'O' to switch off. For gas models, wait 5 minutes before relighting. The cooling fan may remain active after switching off.
Main Menu Navigation:
The oven offers various cooking modes: Manual, Automatic, Programs, Homepage (SkyHub/SoloMio), and Cleaning mode. Navigate the main menu by touching the upper drawer icons. Touch the desired icon to access different modes.
Manual Mode:
Customize cooking cycles by selecting Convention, Combi, or Steam, and setting humidity, time, and temperature. Options like Delay Start, Auto Start, and Food Safe Control (FSC) are available.
Automatic Mode:
Quickly cook food by selecting the required food and cooking method for consistent results.
Programs Mode:
Recall and restore previously saved recipes and settings.
Troubleshooting and error codes
| Anomaly Type | Description | Possible causes | Actions |
| BSHt Warning N°315 | Boiler SSR NTC (NTC4) high temperature | Inlet air filter dirty; Cooling fan failure; Cooling inlet air sucking warm/hot air; Oven installed by hot machine; Steam/Heat leakage in the electronic compartment; | Do not switch the oven Off; Wait for the temperature to decrease; Clean the inlet air filter; Check air flow at cooling air inlet; If not, call Service; Check if inlet cooling air is affected by heat from kitchen appliances; If error persists, call Service. |
| BSOt Stops cooking cycle N°314 | Boiler SSR NTC overtemperature (NTC4) | Inlet air filter dirty; Cooling fan failure; Cooling inlet air sucking warm/hot air; Oven installed by hot machine; Steam/Heat leakage in the electronic compartment. | The oven can continue to work in recovery mode: cooking cycles will not use the boiler. Do not switch the oven Off; Wait for the temperature to decrease; Clean the inlet air filter; Check air flow at cooling air inlet; If not, call Service; Check if inlet cooling air is affected by heat from kitchen appliances; If error persists, call Service. |
| butn Stops oven N°101 | One or a combination of the panel buttons are permanently blocked | The panel has been accidentally hit or damaged. | Press all buttons to possibly unlock the wrong one/ones. The permanent blocked buttons are lighted during the error on display. |
| Cdo Warning in cooking N°260 | Cleaning drawer cap absent | The cap of the cleaning drawer is not detected; it is not possible to FINISH a cooking or cleaning cycle. | The oven can continue to cook but cleaning cycle could not be performed until the drawer cap will be in place; Screw correctly the cap on the cleaning drawer; If the error persists, rotate the cap 180° and screw again. Call Service. |
| CFbL Warning N°294 | Cooling fan failure | Cooling fan motor overload due to dirt or oxidation; Other electrical/mechanical issue | The oven will be operative until the electronic will reach the critical temperature. Call Service. |
| CLdr Warning N°310 | Cleaning drawer cap missing before starting a cooking or cleaning cycle | The cap of the cleaning drawer is not detected. It is not possible to START a cooking or cleaning cycle. | Screw correctly the cap on the cleaning drawer; If the error persists, rotate the cap 180° and screw again. Call Service. |
| CntC Stops cooking cycle N°310 | Cavity SSR NTC failure (NTC3) | Connector failure; NTC sensor failure; ACU failure. | Restart the oven; If the error persists, call Service. |
| CPUA Stops oven N°203 | ACS microprocessor does not communicate | ACU failure. | Restart the oven; If the error persists, call Service. |
| CPUt Stops oven N°204 | TC microprocessor does not communicate | ACU failure. | Restart the oven; If the error persists, call Service. |