Brand: Electrolux
Category: Refrigerator
Document Type: Manual
Language: EN
Manual for EN3881AOY
Uploaded: Sept. 12, 2025, 4:19 a.m.
Warranty Information
Contact an authorized service center for any servicing or repairs using only genuine spare parts.
- Safety First: Always read the manual, especially safety warnings, before operating the appliance. Keep packaging away from children.
- Daily Use: Do not place hot items on plastic parts, avoid flammable liquids, and do not refreeze thawed food. Store food according to manufacturer instructions.
- Controls: The control panel features a display for temperature, mode selection, and various functions like HolidayMode, EcoMode, and ChildLock.
- Cooling: Features like Dynamic Air Cooling and Humidity Control ensure optimal food preservation.
- Maintenance: Regularly clean the interior with mild soap and water. Defrosting is automatic for the refrigerator and "no frost" for the freezer.
Troubleshooting and error codes
| Problem | Possible cause | Solution |
|---|---|---|
| The appliance is noisy. | The appliance is not supported properly. | Check if the appliance stands stable (all the four feet should be on the floor). |
| The compressor operates continually. | The Temperature regulator may be set incorrectly. | Set a warmer temperature. |
| The door is not closed correctly. | Refer to "Closing the door". | |
| The door has been opened too frequently. | Do not keep the door open longer than necessary. | |
| The product temperature is too high. | The product temperature is too high. | Let the product temperature decrease to room temperature before storage. |
| The room temperature is too high. | The room temperature is too high. | Decrease the room temperature. |
| Water flows on the rear plate of the refrigerator. | The Fast freezing function is switched on. | Refer to "Fast freezing function". |
| During the automatic defrosting process, frost defrosts on the rear plate. | This is correct. | |
| Water flows into the refrigerator. | The water outlet is clogged. | Clean the water outlet. |
| Products prevent that water flows into the water collector. | Make sure that products do not touch the rear plate. | |
| Water flows on the ground. | The melting water outlet does not flow in the evaporative tray above the compressor. | Attach the melting water outlet to the evaporative tray. |
| There is too much frost and ice. | Products are not wrapped properly. | Wrap the products better. |
| The door is not closed correctly. | Refer to "Closing the door". | |
| The temperature in the appliance is too high. | The Temperature regulator may be set incorrectly. | Set a higher temperature. |
| The door is not closed correctly. | Refer to "Closing the door". | |
| The product temperature is too high. | Let the product temperature decrease to room temperature before storage. | |
| Many products are stored at the same time. | Store less products at the same time. | |
| The temperature in the refrigeration is too high. | There is no cold air circulation in the appliance. | Make sure that there is cold air circulation in the appliance. |
| The temperature in the freezer is too high. | Products are too near to each other. | Store products so that there is cold air circulation. |
| The appliance does not operate. | The appliance is switched off. | Switch on the appliance. |
| The mains plug is not connected to the mains socket correctly. | Connect the mains plug to the mains socket correctly. | |
| The appliance has no power. There is no voltage in the mains socket. | Connect a different electrical appliance to the mains socket. Contact a qualified electrician. | |
| The lamp does not work. | The lamp is in stand-by. | Close and open the door. |
| "dEMo" appears on the display. | The appliance is in demonstration mode. | Keep pressed approximately 10 sec the Mode button since a long sound of buzzer is heard and the display shut off for a short while: appliance start works regularly. |
| The buzzer sounds. The Display is red. | The door is not closed correctly. | Refer to "Door open alarm". |
| Upper or lower square is shown in the temperature display. | An error has occurred in measuring the temperature. | Call your service representative (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible). |