Brand: ELECTROLUX
Category: Refrigerator
Document Type: Manual
Language: EN
Manual for ENN2814COW
Uploaded: Nov. 21, 2025, 8:09 p.m.
Warranty Information
Refer to the rating plate for model, PNC, and Serial Number when contacting the Authorised Service Centre.
Switching On
Connect the appliance to the power socket. Press the ON/OFF button if the display is off. The temperature indicators will show the set default temperature. An alarm buzzer may sound briefly.
Switching Off
Press ON/OFF for 3 seconds. The display will switch off. To disconnect from power, unplug the mains plug.
Temperature Regulation
Select the fridge or freezer compartment. Press the temperature button to set the desired temperature. Default temperatures are +4°C for the fridge and -18°C for the freezer. The set temperature will be reached within 24 hours.
Special Functions
Several functions are available via the 'Mode' button, including EcoMode, ShoppingMode, Holiday mode, DrinksChill, and FastFreeze, each with specific uses and automatic shut-off times or activation conditions.
Troubleshooting and error codes
| Problem | Possible cause | Solution |
|---|---|---|
| The appliance does not operate. | The appliance is switched off. | Switch on the appliance. |
| The mains plug is not connected to the mains socket correctly. | Connect the mains plug to the mains socket correctly. | |
| There is no voltage in the mains socket. | Connect a different electrical appliance to the mains socket. Contact a qualified electrician. | |
| The appliance is noisy. | The appliance is not supported properly. | Check if the appliance stands stable. |
| Audible or visual alarm is on. | The cabinet has been recently switched on or the temperature is still too high. | Refer to "Door Open Alarm" or "High Temperature Alarm". |
| The temperature in the appliance is too high. | Refer to "Door Open Alarm" or "High Temperature Alarm". | |
| The door is left open. | Close the door. | |
| A square symbol is shown instead of numbers on the Temperature Display. | The temperature in the appliance is too high. | Contact a qualified electrician or contact the nearest Authorized Service Centre. |
| The lamp does not work. | The lamp is in stand-by. | Close and open the door. |
| The lamp does not work. | The lamp is defective. | Contact the nearest Authorized Service Centre. |
| The compressor operates continually. | Temperature is set incorrectly. | Refer to "Operation" chapter. |
| Many food products were put in at the same time. | Wait some hours and then check the temperature again. |