Brand: ELECTROLUX
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Epic 6500 SR™
Uploaded: Sept. 12, 2025, 4:13 a.m.
Warranty Information
Electrolux warrants its products against defects in workmanship or material for 5 years from the date of purchase.
Connecting the Power Cord: Pull the cord to the required length (yellow band indicates limit). Connect the plug to a wall outlet. The control light will indicate power. The cordwinder automatically rewinds the cord with a gentle tug. Hold the plug to control the rewind speed.
Starting the Cleaner: Gently press the toe switch on top of the unit. Press again to stop. Always switch OFF before disconnecting the power cord.
Using the Power Nozzle: Use for all dry floor cleaning. It self-adjusts to carpet heights and hard surfaces. Maneuvers easily. Switch has two positions: 'I' for high-speed brush action, '0' to disengage brush for delicate surfaces.
Object Obstruction: If the power nozzle stops, turn the cleaner OFF. If the object is caught in the agitator brush, turn the nozzle over and remove it. If further in, detach the wand and remove. Push the reset switch (M) on the top of the power nozzle to reset.
Starting the Cleaner: Gently press the toe switch on top of the unit. Press again to stop. Always switch OFF before disconnecting the power cord.
Using the Power Nozzle: Use for all dry floor cleaning. It self-adjusts to carpet heights and hard surfaces. Maneuvers easily. Switch has two positions: 'I' for high-speed brush action, '0' to disengage brush for delicate surfaces.
Object Obstruction: If the power nozzle stops, turn the cleaner OFF. If the object is caught in the agitator brush, turn the nozzle over and remove it. If further in, detach the wand and remove. Push the reset switch (M) on the top of the power nozzle to reset.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Power nozzle will not run properly or headlight stops working. | Power nozzle issue. | Contact your local Electrolux branch for service. |
| Cleaner shuts off. | Overheating. | Turn cleaner OFF, disconnect power. Check wand, hose, and power nozzle for blockage. Allow to cool for 30 minutes. |
| Cleaner will not start. | No power or filter bag issue. | Check power source. Ensure filter bag is in place. If Bag Check symbol (P) appears, insert new filter bag. |
| Bag change indicator (Q) illuminates and cleaner shuts off. | Filter bag needs replacement. | Replace filter bag and reset ON/OFF switch. |