Brand: Electrolux
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for ERGORAPIDO AND ERGORAPIDO ULTRA
Uploaded: Sept. 12, 2025, 4:28 a.m.
Warranty Information
Electrolux provides a two-year limited warranty covering defects in material and workmanship for normal household use.
Assembly: Connect upper and lower handles, then secure with a locking screw. Position charging station near a main socket, connecting the adaptor. Ensure the wall can support the weight if mounting.
Charging: Place the turned-off Ergorapido® in the charging station. Blue indicator lights will illuminate. Full charge takes up to 24 hours for the first use, and approximately 15-20 hours for subsequent charges.
Operation: Start by pushing the on/off button upwards for full power or downwards for intermediate power. For tables and furniture, detach the hand unit by pressing release buttons and use the crevice nozzle or small brush.
Maintenance: Empty dust container when full. Clean filters regularly. Clean brushroll if blocked by releasing the cover and removing it. Clean bellows and wheels if necessary.
Disposal: Remove batteries, drain them, undo screws, lift the hood, unclip cables, and remove batteries. Dispose of batteries at a recycling station.
Troubleshooting and error codes
| Possible Cause | Solution |
|---|---|
| Unit not operating | • Ensure unit is charged. |
| Low suction power |
• Empty dust container. • Clean fine filter. • Check brushroll for blockages. |
| Brushroll blocked |
• Turn off unit. • Release brushroll cover and remove brushroll. • Clean brushroll. |
| Unit does not charge |
• Ensure charger is properly connected. • Check if indicator lights are on. • Contact service if issues persist. |