Name: Manual for L-300/200
Brand: EPSON
Availability: InStock

Troubleshooting and error codes

MESSAGE	PROBLEM & SOLUTION
This memory card is write-protected.	Problem: Memory card is locked. Solution: Unlock the memory card by hand. (See page 85.)
Memory card error. Check the memory card.	Problem:Unspecified memory card problem. Solution:Remove the card and replace it. (See page 16.) Contact the card maker.
No memory card inserted.	Problem: The camera has no memory card inserted. Solution:Insert a memory card. (See page 16).
The memory card is full.	Problem: No more room for data on the memory card. Solution: Make room by deleting data (See pages 36-37.) or export the data to your computer and then reformat the card. (See page 85.)
No Frames.	Problem: No frames stored in the camera. Solution: Load up to 2 frames into the camera. (See pages 48-49.)
This Frame file cannot be used with this camera.	Problem: The camera doesn't support the frame. Solution: Reload with different frame that can be used with this camera. (See pages 49.)
No images	Problem:There are no images recorded on the memory card. Solution: Insert a memory card with images. Also check the image after each shot to confirm.
This image cannot be displayed.	Problem: The image file exists but can't be displayed. Solution: Playback System (See page 32.)
This file cannot be deleted because this file is locked or cannot be deleted.	Problem: This image has been locked to prevent deletion. Solution: Delete the image with the machine that took the image or locked it.
Some files are locked or could not be deleted.	Problem: Some images on this card have been write-protected. Solution: Delete the image with the device that took the image or locked it.
The necessary Frame file does not exist or is unusable.	Problem: The picture can't be viewed because there is no file or the link has been broken. Solution: The link has been broken or the frames itself has been deleted. Replace or add a frame linked to this file. (See pages 49.)
Not enough free space on the memory card.	Problem:Not enough memory left on the card to record the picture. Solution: Either delete some pictures or reformat the card. (See pages 36-37.)
Not enough free space in the camera's memory.	Problem: Not enough camera memory to transmit the frame. Solution: Delete one or more PIF frames from camera memory. (See page 48.)
A Frame with the same name already exists. Replace it with this Frame?	Problem:Another frame with this name exists either on the memory card or in the camera. Solution:You may choose to replace it. Please note that the new file will overwrite the existing one.
Battery power is low. Connect AC adapter.	Problem: Little battery power remaining. Solution: The camera won't continue to direct print when the power is low. Connect to AC power.
Make sure that the printer is on and connected.	Problem: The DP cable is disconnected; the printer selected doesn't support the direct printing; is connected to another device (other than a computer), the printer power is turned off. Solution: Reconnect the camera correctly to the printer and turn the printer power on. (See page 66.)
Black ink out. Replace the black ink cartridge.	Problem: The printer is out of black ink. Solution: Replace the black cartridge following the printer instruction booklet.
Color ink out. Replace the color ink cartridge.	Problem: The printer is out of colored ink. Solution: Replace the colored cartridge(s) following the printer instruction booklet.
Check the ink cartridges.	Problem: An ink cartridge is missing or not set properly in the printer. Solution: Set or reset ink cartridge(s) following the printer instruction booklet.
Paper out. Load paper.	Problem: The paper isn't set properly in the printer. Solution: Set or reset the paper following the printer instruction booklet.
Paper jam.	Problem: A sheet of paper has jammed during printing. Solution: Clear the jam following the printer instruction booklet.
This image cannot be printed.	Problem: You have selected an image that can't be printed. Solution: Select another image.
Printer error.	Problem: There may be a problem with the printer. Solution: Turn the printer off for a few seconds then turn the power back on. If the error message still appears, turn the power off and check to see if there is anything (packing materials, paper) stuck inside the printer. Then turn the power back on.
There is no response from the printer.	Problem: The printer has frozen and won't communicate with the camera. Solution: Check the camera to printer connection. Check that the printer power is turned on. See the printer instruction booklet for further details.
Could not print.Try printing again?	Problem: If the printer is in the middle of printing something, it may not be able to accept the next request. Solution: Restart the printer or wait until the current print run is finished and then try again.
Could not print.	Problem: The printer has rejected the print request. Solution: If neither of the above works, see the printer instruction booklet for further remedies.Restart the printer or resend the request from the camera. If none of these remedies work, contact your nearest Epson Customer Support.
A communication error has occurred.	Problem: Either the cable has been disconnected or the power has been turned off. Solution: Recheck that the cable is connected, turn the power back on and try again.
xx images could not be printed.	Problem: If some of the images were taken with another camera or have been changed by software, only the images taken with this camera will be printed. Solution: Use the actual camera or computer that was used to create the images in order to print them.
Cannot print because the necessary Frame file does not exist or is corrupted.	Problem: The picture can't be printed because there is no frame file or the link has been broken. Solution: Replace or add a frame linked to this file. (See page 49.)
This function cannot be performed from the camera with the printer you are using.	Problem: The printer does not support this function. Solution: You can try to clean it in some other way, but the printer doesn't support the camera's function.
This printer is not supported.	Problem: The printer isn't made for direct printing. Solution: Make sure the printer supports direct printing before you buy it.
Parts inside your printer require maintenance.	Problem: The printer cannot print because the components within the printer needs adjusting. Solution: Turn the printer off for a few seconds then turn the power back on. If the error message still appears, consult the shop you bought your printer from or the Epson Customer Support.