Brand: EPSON
Category: Printer
Document Type: Manual
Language: EN
Manual for ET-2810 Series L3250 Series
Uploaded: Nov. 21, 2025, 8:39 p.m.
Manual Publish Date: 2020
Warranty Information
Warranty information is not explicitly detailed in this section.
Printing
Printing Documents: Print documents from Windows, Mac OS, and smart devices (iOS/Android). Supports printing on envelopes and web pages.
Copying: Basic copying and making multiple copies.
Scanning
Scanning Basics: Learn about scanning, its uses, methods, recommended file formats, and resolutions.
Scanning to Devices: Scan originals to a computer or smart device. Supports advanced scanning and scanning multiple photos.
Maintaining the Printer
Maintenance Tasks: Check ink levels, improve print/copy/scan quality, clean the print head, run power cleaning, prevent nozzle clogging, and align the print head.
Cleaning: Instructions for cleaning the paper path, scanner glass, and the printer itself. Also covers cleaning spilled ink.
Ink Management: Refill ink tanks and handle ink bottles with care.
Troubleshooting
Common Issues: The printer not working, not turning on/off, power turning off automatically, paper feeding problems, printing errors, scanning errors, and jammed paper.
Quality Issues: Poor print, copy, or scanned image quality.
Adding or Replacing Computer/Devices
Connect to a network printer, use a network printer from a second computer or smart device, reset network connections, and replace the wireless router.
Troubleshooting and error codes
| Light | Status | Solutions |
|---|---|---|
| Wi-Fi connection error has occurred. | Press the Wi-Fi button to clear the error and try again. | |
| Initial ink charging may not be complete. | See the Start Here poster to complete initial ink charging. | |
| No paper is loaded or more than one sheet has been fed at a time. | Load paper and press the | |
| A paper jam has occurred. | Remove the paper and press the If the paper jam error continues after removing the paper and turning the power off and on again, paper may remain inside the printer. Load A4 size paper in the rear paper feeder, and then press the If the error cannot be cleared, contact Epson support. | |
| The printer was not turned off correctly.* Because the printer was turned off while operating, the nozzles may have dried and clogged. * The power was turned off with a power strip or breaker, the plug was pulled out of the outlet, or an electrical failure occurred. | After clearing the error by pressing the To turn off the printer, make sure you press the | |
| When the An ink pad is nearing or at the end of its service life. | The ink pads need to be replaced. Contact Epson or an authorised Epson service provider to replace the ink pad *1. It is not a user-serviceable part. When a message saying that you can continue printing is displayed on the computer, press the | |
| When the A borderless printing ink pad is nearing or at the end of its service life. | The borderless printing ink pad need to be replaced. Contact Epson or an authorised Epson service provider to replace the ink pad *2. It is not a user-serviceable part. When a message saying that you can continue printing is displayed on the computer, press the Borderless printing is not available, but printing with a border is available. | |
| The printer has started in recovery mode because the firmware update failed. | Follow the steps below to try to update the firmware again. 1. Connect the computer and the printer with a USB cable. (During recovery mode, you cannot update the firmware over a network connection.) 2. Visit your local Epson website for further instructions. | |
| A printer error has occurred. | Remove any paper inside the printer. Turn the power off and on again. If the error continues to occur after turning the power off and on again, contact Epson support. |