Brand: EPSON
Category: Printer
Document Type: Manual
Language: EN
Manual for XP-2200 Series
Uploaded: Sept. 12, 2025, 4:15 a.m.
Manual Publish Date: 2022
Printing
Print documents from a computer or smart device. Can print on various paper types including envelopes.
Copying
Basic copying functions are available, including making multiple copies.
Scanning
Scan documents to a computer or smart device using available methods and recommended file formats.
Troubleshooting and error codes
| Light | Status | Solutions |
|---|---|---|
 |
Wi-Fi connection error has occurred. | Press the Wi-Fi button to clear the error and try again. |
 |
An ink cartridge is expended or there is insufficient ink in the cartridge to charge the ink. | To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates it is time to replace the cartridge. Replace with a new ink cartridge. |
|
An ink cartridge is not installed. | Install the ink cartridge. |
|
An ink cartridge has not been recognized. | Press the ink cartridge down firmly. |
|
An unsupported ink cartridge has been installed. | Install an ink cartridge that is supported by this printer. You cannot use the cartridges that came with your printer for replacement. |
 |
An ink cartridge is nearly expended. You can print until the light turns on. | Prepare a new ink cartridge. You can check the ink levels from the computer. |
 |
No paper is loaded or more than one sheet has been fed at a time. | Load paper and press the  or  button. |
 |
Flashing slowly (at 1.25 second intervals) A paper jam has occurred. | Remove the paper and press the or button. |
 |
Flashing fast (at 0.5 second intervals) Paper remains inside the printer. | Load A4 size paper in the rear paper feeder, and then press the or button to remove the paper inside. Load paper in the portrait direction. |
 |
The printer was not turned off correctly.* Because the printer was turned off while operating, the nozzles may have dried and clogged. | After clearing the error by pressing the or button, we recommend performing a nozzle check. Cancel any pending print jobs. To turn off the printer, make sure you press the  button. |
 |
Flashing simultaneously The ink pads need to be replaced. An ink pad is nearing or at the end of its service life. | Contact Epson or an authorised Epson service provider to replace the ink pad *1. It is not a user-serviceable part. When a message saying that you can continue printing is displayed on the computer, press the or button to continue printing. The lights stop flashing for the time being, however, they will continue to flash at regular intervals until the ink pad is replaced. |
 |
Flashing alternately A borderless printing ink pad is nearing or at the end of its service life. | The borderless printing ink pad need to be replaced. Contact Epson or an authorised Epson service provider to replace the ink pad *2. It is not a user-serviceable part. When a message saying that you can continue printing is displayed on the computer, press the or button to continue printing. The lights stop flashing for the time being, however, they will continue to flash at regular intervals until the ink pad is replaced. Borderless printing is not available, but printing with a border is available. |
 |
The printer has started in recovery mode because the firmware update failed. | Follow the steps below to try to update the firmware again. 1. Connect the computer and the printer with a USB cable. (During recovery mode, you cannot update the firmware over a network connection.) 2. Visit your local Epson website for further instructions. |
 |
A printer error has occurred. | Open the scanner unit and remove any paper or protective material inside the printer. Turn the power off and on again. If the error continues to occur after turning the power off and on again, contact Epson support. |