Manual for WAP-02EA20

Manual for WAP-02EA20

Brand: equation

Category: Air Conditioner

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 7:50 p.m.

Warranty Information

This product comes with a 2-year guarantee.

The control panel features an LED display, warning light, and controls for mode, fan speed, timer, and temperature. The power control turns the unit on/off. The mode control offers Cool, Dehumidify, and Fan settings. Fan speed can be adjusted to High, Medium, or Low. The timer allows for auto turn-off or auto turn-on functions. Temperature is adjustable in Cool mode. A remote control with similar functions is also provided. The unit requires a 3-minute wait before restarting after being switched off.

Troubleshooting and error codes

Trouble Analysis
Does not run
  • If the protector trip or fuse is blown, please wait for.
  • Please wait for 3 minutes and start again, protector device may be preventing unit from working.
  • If batteries in the remote control are used up.
  • If the plug is not properly plugged.
Stops running during operation
  • If the set temperature is close to room temperature, you can lower the set temperature.
  • Air outlet be blocked by obstacle. Take the obstacle away.
Runs but does not cool
  • If the door or window open.
  • If there is other heater appliance work nearby, like heater or lamp, etc...
  • The air filter is dirty, please clean it.
  • Air outlet or intake be blocked.
  • Set temperature is too high.
Does not run and water full indicator is lit
  • Drain the water into a prepared container by the drainage pipe on the rear panel of the unit. If it still doesn't work, please consult a qualified technician.
LED display "E1"
  • The temperature sensor error
LED display "E2"
  • The coil sensor error
Privacy Policy