Brand: Frigidaire
Category: Oven
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for FGW3069UF
Uploaded: Nov. 21, 2025, 7:41 p.m.
Manual Publish Date: 2019-10-01
Warranty Information
This manual does not contain specific warranty period information.
- Read all instructions before installation.
- Remove packing material before electrical connection.
- Observe all codes and ordinances.
- Save instructions for consumer.
- Remove oven door for easier installation.
- Oven not approved for stackable or side-by-side installation.
- Base must support 150 lbs (27") or 200 lbs (30").
- Allow 21" clearance for door depth.
- Dimension G (cutout depth) is critical.
- For excessive cutout height (H), use shims.
- Electrical: Ensure proper voltage and frequency, connected to a dedicated, grounded branch circuit with breaker/fuse.
- Refer to Table A for circuit breaker/fuse amperage.
- Use 3-wire or 4-wire single-phase supply.
- Do not use extension cords.
- Connect to fused disconnect/breaker box via flexible cable.
- Ensure proper strain relief.
- Electrical grounding is required.
- Do not connect to electrical supply until permanently grounded.
- Disconnect power before making connections.
- Use only approved connectors for copper/aluminum wire.
- Do not ground to a gas pipe.
- Cabinet Installation: Use 2+ people, do not lift by door/control panel.
- Install anti-tip screws.
- Install bottom trims correctly.
- Level the oven using shims if necessary.
- Check oven operation.