Brand: FRIGIDAIRE
Category: Washer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for A07504301
Uploaded: Nov. 21, 2025, 6:40 p.m.
Manual Publish Date: 2016-10-01
Warranty Information
This manual details operation and care for your Frigidaire washer.
Washing Procedures:
1. Sort laundry by color, fabric type, and soil level. Prepare items by emptying pockets, closing zippers, etc.
2. Add the appropriate amount of HE, low-sudsing detergent. Use bleach dispenser for liquid bleach if desired.
3. Add liquid fabric softener to its dispenser.
4. Select the appropriate cycle, temperature, soil level, and options.
5. Press POWER to turn on, then START to begin the cycle.
6. Remove items promptly after the cycle ends.
1. Sort laundry by color, fabric type, and soil level. Prepare items by emptying pockets, closing zippers, etc.
2. Add the appropriate amount of HE, low-sudsing detergent. Use bleach dispenser for liquid bleach if desired.
3. Add liquid fabric softener to its dispenser.
4. Select the appropriate cycle, temperature, soil level, and options.
5. Press POWER to turn on, then START to begin the cycle.
6. Remove items promptly after the cycle ends.
Troubleshooting and error codes
| ERROR CODE | POSSIBLE CAUSE | SOLUTIONS |
| E1 | Water fill time takes too long (1 hour) | Close washer lid. Fully open hot and cold faucets. Straighten inlet hoses if kinked. Check water supply pressure. Disconnect inlet hoses and clean screens. Check for water leakage. If situation continues, call service. |
| E2 | Washer takes too long to drain (10 minutes) | Check fuse/breaker. Check standpipe height. Close lid. Straighten kinked drain hose. Unclog drain hose. If situation continues, call service. |
| E3 | Washer lid open | Close the lid. Lid lock or PCB may have failed. If situation continues, call service. |
| E4 | Washer is out-of-balance | Ensure washer is resting firmly on floor and leveling legs are adjusted. Remove foam shipping support if not done during installation. Stop washer and rearrange wash load. If situation continues, call service. |
| F2 | PCB failed | Call service - 1 800 944 9044. |
| FS | Load sensing failed | Call service - 1 800 944 9044. |
| F8 | Water level sensor failed | Call service - 1 800 944 9044. |
| Fd | Lid lock failed | Call service - 1 800 944 9044. |
| 09 | PCB failed | Call service - 1 800 944 9044. |
| CL | Lid open for more than 20 seconds with Control Lock function activated | Power off unit. Deactivate Control Lock. If situation continues, call service. |