Brand: FRIGIDAIRE
Category: Washer
Document Type: Manual
Language: EN
Available Languages: ES , EN
Uploaded: Nov. 21, 2025, 7:01 p.m.
This manual provides information on the use, safety, maintenance, and troubleshooting of the Frigidaire washing machine.
This manual provides essential information for the safety and proper use of your Frigidaire washing machine.
Safety Instructions:Details the parts of the washing machine, including the control panel, agitator, drum, dispenser, and hoses.
Installation:Description of buttons and their functions (Water Levels, Economy, ON/OFF, Washing Programs, Skip Stage, Extra Rinse, Water Temperature).
Washing Programs:Explains the different washing programs available and their approximate durations.
Cleaning and Maintenance:Instructions for cleaning the interior, lint filter, dispenser, water filter, and exterior.
Troubleshooting:Table with common problems, their probable causes, and corrections.
Tips and Advice:Recommendations for clothing care, stain removal, and environmental protection.
International Symbols:Explanation of clothing care symbols.
Technical Specifications:Technical details of the models.
| Problem | Probable Causes | Corrections |
| If the washing machine doesn't work | The Washing Programs knob is not properly positioned. | Position the knob on the chosen program. |
| The blue LED of the ON/OFF key is not ON. | Press the key and wait for 5 seconds. | |
| The machine is in the soaking step. | Please wait the end of the soak step. | |
| The plug is not properly connected to the outlet. | Check the plug and outlet in which the machine is connected. | |
| The electrical circuit (outlet, power cord, circuit breaker) is in bad condition. | Check the electrical circuit. If necessary, call an electrician. | |
| Blackout. | Wait for the return of the energy. | |
| The washing machine lid is opened. | Close the lid. | |
| It is been used an adaptor ou extension cord. | Do not use adaptors, replace the socket. Do not use extension cord. | |
| The supply voltage is low. | Call an electrician to check the electric net voltage in your home. | |
| Wrong voltage. | Check the correct voltage for your washing machine. | |
| If agitation is low. | The Delicate program was selected. | During the Delicate washing the agitation is slower to not damage clothing. Does not require correction. |
| If the washing machine doesn't drain/spin. | The drain hose is too high. | Place the hose to a maximum height of 140cm. |
| The end of the drain hose in the laundry sink is submerged in water. | Do not let the end of the drain hose stay submerged when the laundry sink is full. | |
| The washing machine lid is opened. | Close the lid. | |
| The drain hose is folded or strangled. | Unfold or clean the drain hose. | |
| Vibration/noises. | The machine is not leveled. | Level the washing machine. |
| The machine is against the wall or to a furniture. | Take the washing machine far from the wall or furniture. | |
| The clothes are badly distributed in the drum. | Distribute the clothes correctly and do not wrap them in agitator. | |
| The package base has not been removed. | Remove all package parts. | |
| Noise during spin. | The drain pump is turned ON causing a characteristic noise, which is normal. | |
| Noise during the start of spin. | It is normal to occur in some cases the contact between the drum and the inside of the washing machine. This does not affect the operation of the washing machine. | |
| If the washing machine fills and drain at the same time. | It was placed more than 20cm o f the drain hose in the drain outlet. | Place it at maximum of to 20 cm of drain hose in the drain outlet. |
| The outlet hose water was amended. | The drain hose can not be amended. Check the hydraulic installation of the residence. | |
| The drain hose is too low. | Position the drain hose at a minimum height of 90cm. | |
| Noise of water inside the washing machine. | Balancing system. | It is normal because your washing machine has a balancing system with a liquid which is inside the drum. This liquid is especially developed to not cause damage to your washing machine. |
| Water doesn't enter in the washing machine. | The faucet is closed. | Open the faucet. |
| The filter in the water inlet hose is clogged. | Clean the filter. | |
| No water comes out of the faucet. | Check the hydraulic system of the residence. | |
| The inlet hose is folded or strangled. | Unfold or clear the hose. | |
| Wrong voltage. | Check the correct voltage for your washing machine. | |
| If softener/bleach comes before its time. | The maximum level was exceeded. | Do not exceed the maximum level indicated in the dispenser. |
| If the softener doesn't exit. | Softener too dense. | Dilute softener with a little of water. |
| Too much softener and/or soap. | Use the quantity recommended on page 25. | |
| The water of the house is dirty. | Install a filter in the faucet. | |
| If the clothes get stained. | Internal cleaning of the washing machine wasn't done. | Clean the washing machine as recommendations. |
| It was mixed clothes of different fabrics. | Separate the clothes according to the table programs indicated on the panel, or according to Tips and Advice. | |
| The clothes are not adequate to wash in the washing machine. | Check the instructions in the clothes labels. See either the International Symbols on page 35. | |
| There are lints in the clothes, | It was mixed clothes of different fabrics. | Separate the clothes according to the table programs indicated on the panel, or according to Tips and Advice. |
| The lint filter is dirty. | Clean the lint filter. | |
| If the drum downs. | Washing machine suspension system. | It is normal the drum downs when full of clothes and water. |
| If the lid does not open. | The safety lock is activated. The machine is in the spinning step. | Wait a few minutes to release the lid (see page 20). |