Brand: Fujitsu
Category: Computers
Document Type: Manual
Language: EN
Manual for ESPRIMO C7xx / C9xx
Uploaded: Nov. 21, 2025, 8 p.m.
Manual Publish Date: 2013-07-01
Getting Started:
1. Unpack and check delivery.
2. Select location and set up device.
3. Connect external devices (mouse, keyboard, monitor).
4. Connect to mains voltage.
5. Switch on the device.
Basic Operation:
- Switching the device on/off.
- Understanding device indicators.
- Using the keyboard and shortcuts.
- Accessing BIOS Setup for configuration and security.
- Protecting data.
- Accessing SmartCard (optional).
System Expansions:
- Instructions for installing/removing drives (Compact Flash, hard disk), SmartCard readers, WLAN modules, boards, and heat sinks.
- Information on mainboard expansions like upgrading memory and replacing the processor.
- Guidance on replacing the lithium battery.
1. Unpack and check delivery.
2. Select location and set up device.
3. Connect external devices (mouse, keyboard, monitor).
4. Connect to mains voltage.
5. Switch on the device.
Basic Operation:
- Switching the device on/off.
- Understanding device indicators.
- Using the keyboard and shortcuts.
- Accessing BIOS Setup for configuration and security.
- Protecting data.
- Accessing SmartCard (optional).
System Expansions:
- Instructions for installing/removing drives (Compact Flash, hard disk), SmartCard readers, WLAN modules, boards, and heat sinks.
- Information on mainboard expansions like upgrading memory and replacing the processor.
- Guidance on replacing the lithium battery.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Power-on indicator does not light up after the device is switched on | Check the power cable connection and the power outlet. Ensure the device is switched on. |
| The device cannot be switched off with the ON/OFF switch. | Force shutdown by unplugging the power cord from the socket. Check BIOS settings or consult a service technician. |
| Monitor remains blank | Ensure the monitor is switched on and connected correctly. Check monitor settings and cable connections. Try a different monitor or cable. |
| No mouse pointer displayed on the screen | Check mouse connection (USB or PS/2). If PS/2, ensure device was off during connection. Check BIOS settings for mouse support. |
| Time and/or date is not correct | Ensure the system BIOS battery is functional. Set the correct time and date in the operating system or BIOS. |
| Error messages on the screen | Note the exact error message and consult the relevant documentation or contact support. |
| Installing new software | Follow the software's installation instructions. Ensure system requirements are met. |
| Restoring the hard disk contents | Refer to backup procedures or system recovery options provided with the operating system or backup software. |