Brand: FUJITSU
Category: Computers
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for ETERNUS DX S5
Uploaded: Nov. 21, 2025, 6:33 p.m.
Manual Publish Date: 2019-12-01
ETERNUS DX60 S5/DX100 S5/DX200 S5 Configuration Workflow
- From Rack Installation to Completion of the Initial Setup: Involves installing the ETERNUS DX in a rack, attaching network information labels, connecting to hosts and drive enclosures, connecting power cords, powering on the system, starting the ETERNUS Web GUI, performing initial setup, and connecting LAN cables for operation management.
- From Completion of the Initial Setup to Completion of the Configuration (with Smart Setup Wizard): Includes setting the firewall, date, SNMP, and Syslog, then using the Smart Setup Wizard for connection, configuring monitoring settings, power control settings, and finally checking the system status.
- From Completion of the Initial Setup to Completion of the Configuration (without Smart Setup Wizard): Similar to the above, but after setting the firewall and date/SNMP/Syslog, it involves setting a RAID configuration, then setting up host interface management, followed by monitoring and power control settings, and system status check.
ETERNUS DX500 S5/DX600 S5/DX900 S5 Configuration Workflow
- From Turning On the Power to Completion of the Initial Setup: Involves powering on the ETERNUS DX, preparing the administration terminal, starting the ETERNUS Web GUI, performing initial setup, and connecting LAN cables for operation management.
- From Completion of the Initial Setup to Completion of the Configuration (with Smart Setup Wizard): Similar to the DX60/100/200 series, this includes setting the firewall, date/SNMP/Syslog, using the Smart Setup Wizard, configuring monitoring and power control settings, and checking system status.
- From Completion of the Initial Setup to Completion of the Configuration (without Smart Setup Wizard): After initial setup, this path involves setting a RAID configuration, setting up host interface management, configuring monitoring and power control settings, and checking system status.
Troubleshooting and error codes
| LED name | LED status | Meaning |
|---|---|---|
| IDENTIFY | (blinks blue) | The installation location of the drive enclosure is identified according to the instruction that is issued from ETERNUS Web GUI or ETERNUS CLI. |
| FAULT | (amber) | The drive enclosure is in error status. |
| POWER | (green) | DC power is supplied to the drive enclosure. |
| Slot No. | (green) | The drive is in normal status. |
| (blinks green) | The drive is in error status. | |
| (amber) | The LED light up operation was performed from the ETERNUS CLI command line in order to identify the drive location. | |
| DRIVE READY | (green) | The drive is in normal status. |
| (blinks green) | The drive is in error status. | |
| DRIVE FAULT | (amber) | The LED light up operation was performed from the ETERNUS CLI command line in order to identify the drive location. |
| DI (IN) LINK | (green) | The link between the DI (IN) port and the source port has been established. |
| DI (IN) FAULT | (amber) | The ports to remove the cables between enclosures from are indicated. This occurs while a drive enclosure is being added. The link between the DI (IN) port and the source port is in error status. |
| (blinks amber) | The ports to connect the cables are indicated. This occurs while a drive enclosure is being added. | |
| DI (OUT) LINK | (green) | The link between the DI (OUT) port and the destination port has been established. |
| DI (OUT) FAULT | (amber) | The link between the DI (OUT) port and the destination port is in error status. |
| (blinks amber) | The ports to connect the cables are indicated. This occurs while a drive enclosure is being added. | |
| READY | (green) | The I/O module is in normal status. |
| IDENTIFY | (blinks blue) | The installation location of the I/O module is identified according to the instruction that is issued from ETERNUS Web GUI or ETERNUS CLI. |
| FAULT | (amber) | The I/O module is in error status. |
| POWER | (green) | Power is supplied to the power supply unit. |
| (blinks green) | Power is supplied to the power supply unit, but DC power is not supplied to the ETERNUS DX. | |
| FAULT | (amber) | Power is not supplied to the power supply unit. |
| AC MISSING | (amber) | Power is not supplied to this power supply unit, but power is supplied to the other power supply unit. |
| FAN FAIL | (amber) | The power supply unit or the fan in the power supply unit is in error status. |
| READY | (green) | The fan expander module is in normal status. |
| FAULT | (amber) | The fan expander module is in error status. |
| IDENTIFY | (blinks blue) | The installation location of the fan expander module is identified according to the instruction that is issued from ETERNUS Web GUI or ETERNUS CLI. |