Brand: FUJITSU
Category: Computers
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SH-E514TR1 10 Gigabit Ethernet SmartPro Switch
Uploaded: Nov. 21, 2025, 6:17 p.m.
Warranty Information
Refer to your service provider for warranty information.
Basic Operation of the Switch
The Switch can be managed using a Web-based Management utility accessible through any port. A PC with an IP address in the same subnet as the switch is required for configuration. The switch supports up to four concurrent users. Recommended web browsers include Internet Explorer 11, Firefox 43.0.4, and Google Chrome 47.0.
Connecting to the Switch: Connect a PC with an RJ45 Ethernet connection to any port on the switch using a standard Ethernet cable. Ensure the PC has an IP address within the same subnet as the switch's default IP address (192.168.1.1) and a subnet mask of 255.255.255.0.
Logging in: Open a web browser, enter the switch's IP address (e.g., 192.168.1.1), and press ENTER. Use the default username 'admin' and password 'admin' to log in.
Troubleshooting and error codes
| Issue | Solution |
|---|---|
| Switch does not power on. | Ensure the power cable is securely connected to both the Switch and a working power outlet. Check the power outlet by plugging in another device. |
| Cannot access the Web-based Management interface. | Verify that your PC has an IP address in the same subnet as the Switch. Ensure the Ethernet cable is properly connected. Try accessing the Switch using its default IP address (192.168.1.1). |
| Link light is not on for a port. | Check the Ethernet cable connection at both ends. Ensure the connected device is powered on and configured correctly. Try a different Ethernet cable or port. |