Manual for 20" wide LCD Display

Manual for 20" wide LCD Display

Brand: Fujitsu

Category: Monitors

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:37 p.m.

Manual Publish Date: 2009

Warranty Information

This manual describes setup and operation. Contact sales outlet or help desk for problems.

Basic Operation

Powering On/Off: Use the power button to turn the monitor on or off. The power indicator light shows the status.

Adjusting Tilt: The monitor can be tilted forward or backward by grasping the screen with both hands and moving it to the desired position.

OSD Menu: Access the On-Screen Display menu using the designated buttons for adjusting settings like brightness, contrast, and color temperature.

Connecting: Ensure the monitor and computer are powered off before connecting the data and power cables. Follow the connection diagrams carefully.

Troubleshooting and error codes

Have you this problem? Check the points mentioned:
No screen display (Power indicator is not lit)
  • Check if the monitor is switched on.
  • Check if the monitor power cable is correctly plugged in.
No screen display (Power indicator is lit)
  • Check if the computer is switched on.
  • Check if the data cable is securely screwed to the computer's monitor connector.
  • Press any key on the computer keyboard – the computer might be in power saving mode.
  • Adjust brightness and/or contrast until an image appears.
Message: e.g., No Video Input or No Signal
  • Check if the data cable is securely screwed to the computer's monitor connector.
  • Check if the computer is switched on.
  • The input signal (horizontal frequency and refresh rate) does not meet the monitor's technical specifications. Adjust to valid frequencies using computer software.
Message: e.g., This is 85 Hz overdrive. Change computer display input to ..... x at 60 Hz. or Frequency out of range Please change the display mode to
  • Adjust to valid resolutions using computer software.
Picture position is incorrect
  • Perform automatic screen adjustment (using the AUTO button or via the OSD menu).
  • Adjust the picture position using the OSD menu.
Picture shimmers (vertical stripes)
  • Check if the data cable is securely screwed to the computer's monitor connector.
  • Perform automatic screen adjustment (using the AUTO button or via the OSD menu).
Picture disturbances (horizontal stripes, graininess)
  • Perform automatic screen adjustment (using the AUTO button or via the OSD menu).
Picture too bright or too dark
  • Perform automatic screen adjustment (using the AUTO button or via the OSD menu).
  • Adjust contrast and brightness via the OSD menu if auto-adjustment is unsatisfactory.
Bright or dark pixels
  • Note: Pixel defects are within manufacturing tolerances per ISO 13406-2.
Privacy Policy